Prostock

I just wanted to check in with everyone to ask for help. I have carried on the dodge pro stock deal for the last 2 years by my self with no help from Mopar and very little help from sponsors. At this point I guess I'm coming to a cross road do I quit or find the help I need to improve my program. I have gained a lot of power this year and struggled with fluke parts failure. I know I'm going to here that we need more rpm but actually we need more money. Topcoat has given me more than I have got from any other sponsor but unfortunately its never enough lol. So at this point I have a couple of deals to think about for 2021. I have a couple of meetings lined up and the first thing they look at is your social media following. So if you would like for me to continue please go to prusiensky racing and like my page maybe it will help thank you.
Prusiensky Racing - Home | Facebook

Done. Best of luck to you.

It's too bad there aren't other (non-facebook) places where fanes can show their support. I'm not a FB member.

OK

Done!
Go get em!

You got it.

Done. Good luck !

I do not use farcebook either

Done. Good luck!

Absolutely! Best of luck.

Done. Best of luck fighting an uphill battle Alan.

Done

I hate to say this but your better off racing a brand X NHRA has killed the hemi why do you think Mopar pulled out they could see the writing on the wall Charlie westcott could not get the Ford hemi to run either and that’s the same motor as the dodge

Done. Good luck.

Done! Best of luck

done

I have liked your Facebook page for a long time and like every post I see from you.

I have also liked anyone on Facebook that has supported you.

If there is anything else we can do to help show fan support to potential sponsors let us know.

I often try to send emails to companies that help small teams to thank them for their support of NHRA Drag Racing.

Done, keep it going !

Done. Good luck.

Done! Hope it helps! Best of luck to you and your team!!!

Alan,

Good luck either way it goes.....Love to see people still fighting the good fight. I have no idea how difficult it is to do what you do, but being a small time bracket racer, I know the support helps keep you going. Prostock was always my favorite class, and what got me into racing I think....Obviously times change and so does the sport, but I still love it, and guys like you, are what inspire guys like me to keep going....So I am rooting for you as well.

I would love to see more Mopar Prostock tech trickle down to us bracket guys, and its part of the fun in watching you guys develop more HP every year.

Done hope it helps. Good Luck, I wouldn't watch pro stock if you weren't there.

Thanks its pretty cool to see all the support. I started running pro stock back in 2015 and only planned on running 5 races and check it off a bucket list. Im not rich and I can't believe I have ran more then 100 races 6 years later. Im a fan of pro stock as much as any of you guys and that's a lot of the reason I haven't quit. If I'm gone I don't think there would ever be another dodge in pro stock we can't have that. I have found a lot of power when we were down for covid. The problem is i didn't have the money to have the stock of extra parts. We run great in indy really 3 hundreds of the fastest car. I think we are going to shock everyone in Gainesville and a electric gremlin shows up and we don't even get a chance to make a run. Then we go to St Louis it rains and we don't get a chance. Stay on Monday and run 6.56 lifting at 1100 ft. Go back up make another run and break a $20 retainer that was brand new destroy the motor. Let me tell you this is so frustrating. Unfortunately we don't think top coat will be back in 2021. We need to find more sponsor help so I can just work on my stuff and not customer work. So we will just see how it all goes I will keep you guys updated.

Alan,
If there is someone we can email at Top Coat to show our support many of us would be glad to do that.
Bill

I don't think it would be right for me to give Out the email of the owner of topcoat but if you want to post on their Facebook page or message them on Facebook that would be OK.

Alan,

Is that combo still considered a Hemi 99 platform?

Best of luck in 2021 Alan!
You have fans all over the world!

Ragnar in Iceland

It's not a Hemi 99 in 2006 they came out with the 2.0 block it's a none skirted block the Hemi 99 had skirts around the crankshaft like a 440 block. The 2006 block is like a 340 block.

Have you switched over to the symmetrical plug spacing heads or still running the ones pictured above ? I get the impression the symmetrical plug spacing heads were not good with the carbs but great with the FI.

AG.

Glad to see you posting here Alan Hang in there, currently the only reason I've been keeping up with Pro Stock is to see how you're doing, maybe after the Covid-19 thing plays itself out you'll pick up some more sponsorships Also, care to share your path to Pro Stock? Did you work you way up from the street, brackets, sportsman racing or something else? Thanks

I have switched over not a hundred percent sure it's that much better than my old heads but that's what I run now

I bracket race since the early 90s then I raced top Sportsman in the early 2000s and then just wanted to check it off my bucket list. Sponsorship was very hard in the beginning but as I've raced over the years I've gotten a little help unfortunately not enough to compete with the big teams yet.

So couple of really dumb questions......If I wanted to build a mild one for bracket racing, is that even possible? Are parts available or are they one off made to order type? What's a block cost? What's the bore centerline spacing, and how many cubes can you build one to?