Trick Flow Sml Blk Heads

Looking for lnfo to see if anybody is using them and how they work... Going on a 440 cid roller in a 2200 lb car Thanks for any and all info.. Stay safe out there

We did one engine with them and they worked okay. Nothing fantastic but they worked fine out of the box. Seemed to be a high quality part. Probably the best choice on the market for a big street SB engine.

My brother in law has them on a 416 motor he’s been 10.50 with them so I guess they work ok have heard rumors there coming out with a off set pushrod head but who knows

Thanks for your help . This car well be a track car only Again thanks for your help...

What about Indy?

what do they have that well work on this engine.. Thanks

Both the 360-1 and 360-2 heads Indy makes will make more power than the Trick Flows.
Just go to Indy’s site and read up on them

If you are buying a complete top end, the Indy heads would be worth considering. They use offset rockers

I have ported 360-1's on my 434, not the best numbers I've seen by far but it runs decent. Street/strip 69 Dart, pump 93, 6.25 @ 110 on pump 93 at 3350#. I wouldn't anything less on 440".