300C twin turbo engine

I was offered one of these engines thats in an estate sale. Are they any good? I know nothing about the modern Hemi stuff but I've been given first option on it. Is it suitable to make 1000 hp race motor out of or are we talking boat anchor stuff?

That's a pretty easy target with a set of rods, pistons, and boost.

So just back from looking at the twin turbo hemi partial project. Can anyone enlighten me to what I have here?

Does it come with any warrenty on it being able to run or was it removed due to needing fixing?
Lots of parts missing on that motor

I would look at that as the beginnings of a twin turbo/EFI kit that will bolt to a Gen 3 hemi and I would assume the one it is bolted to is junk until proven otherwise.

Kevin

This comes to mind...

I agree with that assessment. It appears to be an engine that came off the no guarantee pile at a junk yard to use to mock up the turbo system. It may or may not be a usable core. It kind of looks like someone spent an hour bolting on the major parts and then quit. It wasn't rusty enough so they set it outside for a couple years. Could be a good start on an expensive project.

If you can get it cheap then go for it. Don't expect it to fit under a hood.

The turbos and engine may be cores and may still work. You won't know until you get it home and take it apart. Someone has some time in that intake.

1320 Video posted this bad boy in IG today!

Twin Turbo Magnum

looks like a intake and a couple of turbos
The motor appears to be stock