Moparts

Pics of MY custom A-body Headers

Posted By: Dragula

Pics of MY custom A-body Headers - 10/19/20 12:40 AM

Having a set built...Going to be a set of step headers 2-1/8 to 2-1/4 to a 4" collector I think.....Need to see how you guys did them, and how short can they be?
Posted By: jughed

Re: Need pics of your custom A-body NA Headers - 10/19/20 02:18 PM

Which front suspension are you running?? Can't help you if your car has a K-rframe, factory steering, and torsion bars. Good luck if that's the case.
Posted By: Dragula

Re: Need pics of your custom A-body NA Headers - 10/19/20 04:16 PM

Magnum Force on mine...
Posted By: Bigcube

Re: Need pics of your custom A-body NA Headers - 10/19/20 04:41 PM

[Linked Image]

These are 2 1/8"x2 1/4"x4" They are for sale but I don't know if they would fit with stock rails.
Posted By: Dragula

Re: Need pics of your custom A-body NA Headers - 10/19/20 04:57 PM

Originally Posted by Bigcube
[Linked Image]

These are 2 1/8"x2 1/4"x4" They are for sale but I don't know if they would fit with stock rails.


Those go out the fender?
Posted By: Bigcube

Re: Need pics of your custom A-body NA Headers - 10/19/20 05:55 PM

The went over the rails and under the floor.
Posted By: Dragula

Re: Need pics of your custom A-body NA Headers - 10/19/20 08:16 PM

Tall deck or Low? For which heads did you have them on?
Posted By: Bigcube

Re: Need pics of your custom A-body NA Headers - 10/19/20 08:39 PM

Originally Posted by Dragula
Tall deck or Low? For which heads did you have them on?

Tall deck, indy -1 heads with a tube frame, Like I said I don't think they will work as-is with stock rails. Flange ports were big enough for B1's
[Linked Image]

[Linked Image]
Posted By: RobR

Re: Need pics of your custom A-body NA Headers - 10/20/20 04:57 PM

Nice Headers ! up
Posted By: Dragula

Re: Need pics of your custom A-body NA Headers - 10/22/20 10:58 PM

Well, I don't need pics of anyone else's....I got my own now. Not to mention, I won't be pro-streeting this car with this change.....Only one side is done so far. but looks really nice.

Attached picture 2896.jpeg
Attached picture 2895.jpeg
Attached picture 2999.jpeg
Attached picture 2997.jpeg
Posted By: racerx

Re: Need pics of your custom A-body NA Headers - 10/22/20 11:37 PM

Nice fab skills sawzall weld one thing i like about running though the fender is it allow you to lower the car some up
Also saves weight..........may be that 5.90's is in order smoke
Posted By: joes68340s

Re: Need pics of your custom A-body NA Headers - 10/22/20 11:42 PM

A[i][/i]. Nice!
Posted By: Dragula

Re: Need pics of your custom A-body NA Headers - 10/23/20 12:26 AM

Friend of mine makes headers....Took it to him. These are 2-1/8 to 2-1/4 step headers.....

And yes, the plan is to lower the car, put a chin piece on it, and I have a new short block going together. Should be around 520 cubes in a 440 block. The plan is a few more cubes, a little bigger headers, a little bigger carb, and a little bigger cam..And then this engine can be a spare unless someone has to have it..Not even 100 runs on it I think between since new last year.
Posted By: gregsdart

Re: Need pics of your custom A-body NA Headers - 10/23/20 01:33 AM

Sometimes a different approach works well. These over the bar headers were within 1 hp of 2 1/4 dyno headers! The biggest thing was the straighter flow allowed further from the heads. They are 2 1/8 tubes and made 925 hp versus 926 hp with dyno headers on my 550 cube 440-1 motor.

Attached picture p135542_large-1965_Dodge_Dart-Engine_Bay_View.jpg
Posted By: mopowers

Re: Need pics of your custom A-body NA Headers - 10/23/20 02:10 AM

Originally Posted by Dragula
Well, I don't need pics of anyone else's....I got my own now. Not to mention, I won't be pro-streeting this car with this change.....Only one side is done so far. but looks really nice.


Those look great! Where did you purchase the pieces?
© 2024 Moparts Forums