Moparts
Help on a roller lifter
Posted By:
scottb
Help on a roller lifter -
07/06/20
11:23 PM
Can some one help me identify these small block mopar roller lifters there are no markings any where thanks
Posted By:
MR_P_BODY
Re: Help on a roller lifter -
07/07/20
12:26 AM
They look like they are for a 48* block.. I dont know that tie bar.. they have a large clearance
between the roller and lifter
Posted By:
A727Tflite
Re: Help on a roller lifter -
07/07/20
01:07 AM
Not sure how old those are but I have a set of Engles that look very similar to your’s.
Posted By:
scottb
Re: Help on a roller lifter -
07/07/20
01:21 AM
I have no idea either they were in a motor I bought stock 59 degree 340 block
Posted By:
MR_P_BODY
Re: Help on a roller lifter -
07/07/20
01:54 AM
Originally Posted by scottb
I have no idea either they were in a motor I bought stock 59 degree 340 block
I never seen that type of tie bar in a 59*
Posted By:
pittsburghracer
Re: Help on a roller lifter -
07/07/20
02:08 AM
If you are in Brett Millers Facebook page I’m betting he could ID them for you. The bar is on the inside like some of the Comp lifters.
Posted By:
fast68plymouth
Re: Help on a roller lifter -
07/07/20
04:07 PM
Looks like the link bar is open/slotted on the end?
Seems like I used lifters with link bars like that a very long time ago....... like in the 80’s.
Maybe early Crowers?
Posted By:
Cab_Burge
Re: Help on a roller lifter -
07/08/20
02:46 AM
They don't look like any SB Mopar LA motor roller lifter I've seen
I haven't work on any SB Mopar produced and used after 1976 also
© 2024
Moparts Forums