Small block Molnar 4.125 crankshaft

Are their anyone using the Molnar 4.125 small stroker crankshaft with the 2.00 rod journal? If so what length rods are you using? I’m looking to use a 6.300 but I can only find a 6.200 scat rods. Can some point be in the right direction? Thanks

Think compstar makes a 6.250 with that rod journal size
I ran a 6.300 compstar on a 4 inch stroker but not 2.000 size

Will looking into compstar. Thanks

Pretty sure Oliver has a 6.300/ 2.000 rod

I'm about to order that same crank but going to use a 6.200

What brand are you going to use do you have a part #? Looks like the 6.200 will be my choice

I'm running a BPE 4.125" crank with Compstar 6.200 rods.

Do you have a part number or link..i want to make sure I order the right rod the first time

probably Carrillo

I think the box is still in the shop, I'll check shortly. The rods have are for 2.00" journal and .927" pins.

Couldn't find the box.

https://www.cnc-motorsports.com/compstar-csa6200cs2a2ah-h-beam-connecting-rods-41180.html

Thanks for your time