Posted By: Sammy
Where do I start with the MSD Cam Syncronization - 06/13/20 10:54 PM
Just installed the MSD Cam syncronization in to my #1 spark plug and in to my Figital 7 7531 box.
Anyone use one of these and where did you start plotting in your MSD software on your laptop?
Posted By: 340Cuda
Re: Where do I start with the MSD Cam Syncronization - 06/14/20 02:53 PM
Sorry, I can't be of any help but why do you need this?
Is that box capable of Coil near Plug ignition?
I guess I would check with MSD support to see if they can help.
Thanks!
Posted By: Sammy
Re: Where do I start with the MSD Cam Syncronization - 06/14/20 04:38 PM
Sorry, I can't be of any help but why do you need this?
Is that box capable of Coil near Plug ignition?
I guess I would check with MSD support to see if they can help.
Thanks!
Because I want to pull timing out of certain hot cylinders for maximum ET & MPH.
Posted By: Sammy
Re: Where do I start with the MSD Cam Syncronization - 06/14/20 11:43 PM
Hopefully MSD Tech help me out tomorrow and I dont get rushed off the phone
I figured that this isn't a popular add on and I knew I wasn't going to get much of a response. This one is definitely past my pay grade.
Posted By: sr4440
Re: Where do I start with the MSD Cam Syncronization - 06/15/20 01:48 AM
Well, the 1st thing is to go to rockauto and order about 40 plugs because every time you takeaway timing from a cylinder it gets a new plug. Not knowing what type of fuel system you have, so i not sure how much individual cylinder adjustment you have.
It's a lot of fun to play with but it might have been worth .02-.03 at most.
Joe
Posted By: 340Cuda
Re: Where do I start with the MSD Cam Syncronization - 06/15/20 02:54 PM
Sorry, I can't be of any help but why do you need this?
Is that box capable of Coil near Plug ignition?
I guess I would check with MSD support to see if they can help.
Thanks!
Because I want to pull timing out of certain hot cylinders for maximum ET & MPH.
Thanks for the update, let us know what you find out and how it works.
Posted By: greendart408
Re: Where do I start with the MSD Cam Syncronization - 06/15/20 03:47 PM
I learned in short order that I needed this, lifted the head 2x's in about 10, 8th mile passes. I trenched the head and the last time the block too, on my f2 w8 deal. Brett M tried to tell me before I started......
Posted By: Sammy
Re: Where do I start with the MSD Cam Syncronization - 06/15/20 04:51 PM
I learned in short order that I needed this, lifted the head 2x's in about 10, 8th mile passes. I trenched the head and the last time the block too, on my f2 w8 deal. Brett M tried to tell me before I started......
Same here. Brett warned me too.