Moparts
Oiling mod?
Posted By:
65rbdodge
Oiling mod? -
06/05/20
12:04 AM
A friend of mine gave me this 440 I was tearing it down tonight and found this. Has anyone ever seen this before?
Posted By:
MR_P_BODY
Re: Oiling mod? -
06/05/20
12:52 AM
Looks like a Lunoti can ground on a 112 center line.. try looking yo the numbers you see there
Posted By:
65rbdodge
Re: Oiling mod? -
06/05/20
12:56 AM
What about the hole saw used to cut into the cam journal
Posted By:
MR_P_BODY
Re: Oiling mod? -
06/05/20
01:02 AM
Looks like it was cut for oiling.. not factory that I know of.. looks like it wouldnt hurt anything
Posted By:
Chargerfan68
Re: Oiling mod? -
06/05/20
01:55 AM
The last 3 blocks that i had go through my hamds had that. 1 was a 1970 440 block. Another was my 1974 block. They looked exactly like yours. My 1972 400 block has only 1 vertical cut on the surface.
Posted By:
Cab_Burge
Re: Oiling mod? -
06/05/20
05:18 AM
That's stock for lubing the back side of the cam gear
Some blocks have one slot for oiling the gear, some have like yours
Posted By:
earlymopar
Re: Oiling mod? -
06/05/20
12:21 PM
Yes, it does look like a hole saw type of cut but the process and tooling used is called "trepanning"
- EM
Posted By:
Stanton
Re: Oiling mod? -
06/05/20
12:56 PM
My '76 440 block is like that. My '69 383 block had a slot
© 2024
Moparts Forums