Moparts
Intake Compatibility with "Batwings"
Posted By:
GTX MATT
Intake Compatibility with "Batwings" -
06/02/20
05:11 PM
Do the lower single plane intakes like a Holley SD or Eddy Torker/TM7 work with the valley plate/bat wings on a non raised port head?
Posted By:
Tig
Re: Intake Compatibility with "Batwings" -
06/02/20
05:27 PM
We used to run a Torker II with std "Motor home" heads and std, tin intake gaskets on a 440 RB, No issues as I recall. HTH's
Posted By:
fast68plymouth
Re: Intake Compatibility with "Batwings" -
06/02/20
07:08 PM
They should work in any application where the stock valley pan would work.
Posted By:
viperblue72
Re: Intake Compatibility with "Batwings" -
06/02/20
07:29 PM
I think the op is asking what intakes will clear the thick aluminum valley cover.
Posted By:
lewtot184
Re: Intake Compatibility with "Batwings" -
06/02/20
08:25 PM
the heat crossover is usually the problem with valley covers. crossovers aren't a uniform size. all manifolds are different.
Posted By:
AndyF
Re: Intake Compatibility with "Batwings" -
06/02/20
09:35 PM
You can tell if the intake will clear a billet valley plate by just looking at the intake.
© 2024
Moparts Forums