Moparts

PPP airshifters

Posted By: lancer493

PPP airshifters - 05/04/20 10:56 PM

Am trying to locate a dependable source to purchase a PPPairshifter for a Torqueflite. Not sure if that company itself is closed due to virus, as I am unable to make contact by phone or email. Coan's website lists the shifters and components on their website, so I willl call them tomorrow.Trying to work by phone to verify that a company is truly open for bussiness at this time. Anybody know of a good vendor. Thanks in advance, stay healthy ,Bill
Posted By: cudatom

Re: PPP airshifters - 05/05/20 01:37 AM

Originally Posted by lancer493
Am trying to locate a dependable source to purchase a PPPairshifter for a Torqueflite. Not sure if that company itself is closed due to virus, as I am unable to make contact by phone or email. Coan's website lists the shifters and components on their website, so I willl call them tomorrow.Trying to work by phone to verify that a company is truly open for bussiness at this time. Anybody know of a good vendor. Thanks in advance, stay healthy ,Bill


I bought mine from Coan, took a little while as they shut down during the holidays. I think it took 30 days to arrive, ordered right after Christmas and had it by the end of January.
Posted By: max_maniac

Re: PPP airshifters - 05/05/20 02:57 AM

John Cope at CRT is a distributor for PPP.
Posted By: J_BODY

Re: PPP airshifters - 05/05/20 02:57 AM

I believe Ben Holt was a good place to purchase from also.... (John Holt Race Cars)

Jay
Posted By: Wookie316

Re: PPP airshifters - 05/05/20 02:00 PM

Bought mine direct from PPP. No issues at all.
Arrived three weeks later as stated on their site.
Posted By: lancer493

Re: PPP airshifters - 05/05/20 09:20 PM

Thanks guys. Ben,at John Holt Race Cars is working on it right now. Very friendly and helpful people to work with. Thanks for the recommondation. I will let you know how it works out . Bill
Posted By: J_BODY

Re: PPP airshifters - 05/06/20 01:22 AM

They are one sweet piece! I was fortunate to fall into a smokin deal on a used clean N PPP and a shift timer. So glad I was at the right place at the right time. One thing I did do is not use their cable bracket.... I made one that utilizes the rear “ear” on the torqueflight. Fit my car much better and I can drop the pan without disturbing the cable.
Posted By: lancer493

Re: PPP airshifters - 05/06/20 11:49 AM

Thanks J Body. Did a search and found the pics you supplied. Nice work. I will probably fab up something very similar. Thanks again guys. Bill
Posted By: CRT

Re: PPP airshifters - 05/10/20 04:38 AM

PPP for my 518 reverse manual

Attached picture 20180808_124804.jpg
© 2024 Moparts Forums