new build )) - Moparts Forums

Posted By: e85mope

new build )) - 03/23/20 02:04 PM

Well, She's ready for the dyno. 572 b1 originals, K1 crank, Molanr rods, wiesco flat tops 13.8:1 , .800 ish cam (2) ATM 1050 cfm E85 carbs on a hogans sheet metal intake. Hopefully it makes 850 - 900 on the dyno.

Sorry for the poor pics.

Attached picture moror 2.jpg

Posted By: one bad fish

Re: new build )) - 03/23/20 02:13 PM

ganster

Posted By: fast68plymouth

Re: new build )) - 03/23/20 02:32 PM

I def wouldn’t be happy with 850-900 outta that!!

Posted By: jughed

Re: new build )) - 03/23/20 02:49 PM

Nice!! ...which block you using??

Posted By: e85mope

Re: new build )) - 03/23/20 03:00 PM

World products. With MOPAR cast in the side.

Posted By: rb446

Re: new build )) - 03/23/20 03:02 PM

Should do, we've got a guy here with a 580 wedge, 12.5:1, -13's, .765 roller, Indy t-ram with twin Doms, making very close to 900 according to his weight/mph.
nice motor

Posted By: e85mope

Re: new build )) - 03/23/20 03:03 PM

another angle

Attached picture motor 3.jpg

Posted By: racerx

Re: new build )) - 03/25/20 02:05 AM

Good luck with the build

Posted By: MR_P_BODY

Re: new build )) - 03/25/20 02:28 AM

Looks like it should be a great bracket engine

Posted By: Cab_Burge

Re: new build )) - 03/25/20 05:31 AM

Originally Posted by fast68plymouth

I def wouldn’t be happy with 850-900 outta that!!

I"ve built one B1 bracket motor so far, 4.250 stroke with a 4.495 bore, cast B1 single four barrel Dominator intake with a 1450 CFM DAMB best gas carb, that combination made 920 at around 7000 RPM in Boise, ID 3 to 5 yrs ago. It was not a all out go fast race motor, built to repeat and be low maintenance

I hope yours does that for you