Posted By: cl440
Aluminum head repair - 02/25/20 01:20 AM
Looking for someone to mag and possibly repair a set of aluminum 440-1 heads. I live
in South East Michigan. Any suggestions? Thanks
Posted By: dvw
Re: Aluminum head repair - 02/25/20 01:22 AM
Chris Razor in Plymouth.
Doug
Posted By: cudatom
Re: Aluminum head repair - 02/25/20 01:28 AM
I used Modern Cylinder Head. Did a great job.
Posted By: cl440
Re: Aluminum head repair - 02/25/20 01:32 AM
I used Modern Cylinder Head. Did a great job.
I thought about them. Didn't know if they did repairs. Thanks
Posted By: dvw
Re: Aluminum head repair - 02/25/20 10:14 AM
Yes. Chris is one the finest block/head welders there is. He welds only no machine work. For complete job Total Flow. For minor repair Dave Harmon at Engine Craft
Doug
Posted By: e85mope
Re: Aluminum head repair - 02/25/20 02:10 PM
My vote is also for Chris Razor/ Modern Cylinder Head
Posted By: gzig5
Re: Aluminum head repair - 02/25/20 02:29 PM
I haven't used him for repair but did buy a 340 block from Cylinder Heads Exchange in Milwaukee. Seems to specialize in aluminum head repair, porting, and other modifications.
Posted By: deaks
Re: Aluminum head repair - 02/26/20 11:12 PM
Bob at MCH repaired one of my Edelbrock heads and did a great job.
Mick