Posted By: hangemhigh
Billet rocker stands - 12/23/19 12:14 AM
Wondering if anyone here has used the Angelucci Mfg. billet rocker stands on the 286 Max Wedge heads? Thanks, Jim.
Posted By: maximus
Re: Billet rocker stands - 12/24/19 01:57 PM
Have used their Hemi stands many times. Their products are spot on close to perfect. Andy machined many of my motors in the past. His son Angelo took over and they constantly sample check the parts coming off the cnc. Great bunch of guys with many years of knowledge. Known the family for 40 years. They have made some real trick stuff.
Posted By: 451Mopar
Re: Billet rocker stands - 12/25/19 06:26 AM
Have used them on on two sets of Edelbrock MW Victor heads where we milled the stock stands off.
We also milled the stands to the rocker shaft height we wanted.
Posted By: Michael Ecks
Re: Billet rocker stands - 12/29/19 09:06 PM
Bought a set of small block stands recently. Quality is fantastic.