Moparts

Help I.D. This CAM.. maybe Arrington?

Posted By: DemonDust

Help I.D. This CAM.. maybe Arrington? - 03/23/09 02:27 AM

I have a R5 cam I need to id. I think it's an arrington cam.

I'm pretty sure the grind is ARE-23XX.

There are also these numbers on the cam

A0901

39A

R (underlined)

CC

Posted By: DemonDust

Re: Help I.D. This CAM.. maybe Arrington? - 03/23/09 05:08 PM

Posted By: DemonDust

Re: Help I.D. This CAM.. maybe Arrington? - 03/24/09 01:33 AM

Wow! This is the first time I've had a question no one could answer

Posted By: Plumb Wired

Re: Help I.D. This CAM.. maybe Arrington? - 03/24/09 01:47 AM

Why not call Arrington's and ask?

http://www.arringtonengines.com/

Mike Gray
Posted By: RyanJ

Re: Help I.D. This CAM.. maybe Arrington? - 03/24/09 01:49 AM

It's an Arrington Comp Cam..... Call Either Arrington or Comp. Comp might not give out the info about it...
Posted By: DemonDust

Re: Help I.D. This CAM.. maybe Arrington? - 03/24/09 02:28 AM

Quote:

It's an Arrington Comp Cam..... Call Either Arrington or Comp. Comp might not give out the info about it...




Will they give me the info?

I was told they won't give out that info
Posted By: goldmember

Re: Help I.D. This CAM.. maybe Arrington? - 03/24/09 02:33 AM

Talk to Mike at Arrington,he grinds the cams they don't outsource.
Posted By: RyanJ

Re: Help I.D. This CAM.. maybe Arrington? - 03/24/09 03:14 AM

They used to run Comp's in their Truck motors before they got their own grinder. Usually Comp will not give out lobe specs on a proprietary Nascar cam like that.... Just send it to someone with a cam doctor if you can't get them to give up the specs.
Posted By: goldmember

Re: Help I.D. This CAM.. maybe Arrington? - 03/24/09 03:15 AM

Posted By: Domino1609

Re: Help I.D. This CAM.. maybe Arrington? - 03/24/09 03:17 AM

Call later Tuesday,I did a bunch of those on the cam doc, I have the sheets at the shop.

Rick

570-561-1746
Posted By: DemonDust

Re: Help I.D. This CAM.. maybe Arrington? - 03/24/09 04:55 AM

Thanks guys for the help.

Rick, I'll give you a call tomorrow afternoon. I need to talk to you anyway.
© 2024 Moparts Forums