Posted By: GomangoCuda
What are these BB valve covers off of? - 08/03/19 08:53 PM
Posted By: jughed
Re: What are these BB valve covers off of? - 08/04/19 01:39 AM
Posted By: QuickBpBp
Re: What are these BB valve covers off of? - 08/04/19 02:04 AM
From what I can see in the pics they have 6 bolt holes not four....
Posted By: rbkt65
Re: What are these BB valve covers off of? - 08/04/19 02:31 AM
didn't 67 rt/gtx come with chrome valve covers? i think they only had clips on one side. could b wrong. i'm sure i will be corrected at least 3 times. HAHAHAHA
Posted By: topside
Re: What are these BB valve covers off of? - 08/04/19 03:01 AM
Yup, could be '67 GTX or R/T 440, or Barracuda/Dart 383.
Not sure about brackets, or if those are 2 of the same side.
Breather pipe looks pretty big but I don't recall if the chrome-cap style PCV cap is same size as oil-filler cap.
Posted By: NANKET
Re: What are these BB valve covers off of? - 08/04/19 05:41 AM
Those are 64-65’s the pipe comes right out of the flat surface of the covers.
Not from a 67 or 68 those would have a raised circle the ONE pipe comes out of on left side. Pass side would have a rubber grommet for the PCV.
67 GTX/R/T had a heater hose bracket welded,to top of right cover. A body didn’t have this bracket.
Posted By: lewtot184
Re: What are these BB valve covers off of? - 08/04/19 12:08 PM
'64 & '65 426 street wedge.
Posted By: GomangoCuda
Re: What are these BB valve covers off of? - 08/04/19 12:46 PM
I agree looks like 64-65 Street Wedge.
Thanks everyone