Spotted, the elusive 440 6pack Hemi!!!!

You know, you are at a car show, and some "uneducated soul comes along and says something like " my brother-in-law had a 440 6pack Hemi! BS for sure. Right? Well, all most! I saw a real one last Saturday! Before you think my mind is gone, let me explain. Back about 1969 or 70, ma mopar was considering offering the elephant motor with a 6pack option! They actually designed and cast a few manifolds complete with mopar part number.
Fast forward to a few years ago and a friend got a hold of one of these manifolds. He also found a stock Hemi block that the owner thought was shot, since at .060 over it still didn't clean up in a bore or two. So for $200. It found a new home. At .070 over it cleaned up nicely, so now the basics of a real, if not production, 440 6 pack Hemi existed. The car chosen to receive the 6pack Hemi was a 69 baracuda, and was done up to look just like an original green 6 pack. B body car, complete with glass 6 pack lift off hood, emblem, black wheels, red line tires, and chrome lug nuts. Warren did a beautiful job on this car. The fuel lines and aircleaner assembly and all other related items of an original 440 6pack are there.
You can see this car and it's builder Warren, at the Saturday afternoon/nite car show in Anoka MN! I will try and post pictures the next time I get a chance to take some!😀😀

The early prototype intakes I saw were all welded up. It's not one of these intakes, is it?

https://www.manciniracing.com/inmaduplsixp.html

I don't think it was welded, since it has a cast in part#?

Friend of mine built one...He loves those damn carbs....

https://www.youtube.com/watch?v=ueC_4nAdSZ4

Greg, were you at Anoka this last Saturday? I took the Super Bee there, and saw so many people I knew, it took a hour to walk 100 feet.

440 6pack Hemi ... Is that anything like the 426 Max Wedge Hemi?

What about the elusive twisted Hemi? I used to hear of that one.

is this them,no big deal to build

That's the one I was thinking of, an off the shelf mopar performance thing.

Yes I was there. We usually have chairs set up across the street from the parking ramp by the show entrance/ east side.

A vender at Carlisle in Row M that I have bought a ton of NOS Emblems and Hemi Parts off of told me he was involved with Chrysler producing a Hemi six pack intake.. Do not know his last name but his first name is John. He owned or ran a Dealership and raced a Chrysler back in the late 60s and 70s. He also got a New Challenger looked like a body in white and race it also. He did talk about working with Chrysler on the intake and he still might have some intakes of information on these intakes. To bad it is not June instead of August and I could of asked him all he could remember about the process at Mopars at Carlisle.

I had the Irish prototype on mine. Problem was it was always flooded.