Posted By: 360tripleblack77
5 angles valve job near Iowa City / Cedar Rapids - IA - 07/26/19 07:59 PM
Hello Guys,
I'm looking for indications of a machine shop near Iowa City / Cedar Rapids - IA that can make a very nice 5 angle competition valve jobs in some heads that I replaced valve seats.
Thanks!!!
Posted By: furious70
Re: 5 angles valve job near Iowa City / Cedar Rapids - IA - 07/27/19 01:59 AM
Do not use Horn auto in cedar rapids. 40 years ago they were the place but screwed me 10 years ago
Posted By: tboomer
Re: 5 angles valve job near Iowa City / Cedar Rapids - IA - 07/27/19 02:35 AM
R and J performance in Hudson Iowa..Radar Lechtenberg can fix ya up!
Posted By: 69Mcode440
Re: 5 angles valve job near Iowa City / Cedar Rapids - IA - 07/27/19 02:37 AM
Mid America racing engines, Washington, Ia. Dave Bruns.
Posted By: 500ciDuster
Re: 5 angles valve job near Iowa City / Cedar Rapids - IA - 07/27/19 03:19 PM
Horns charged me extra for using a torque plate on a 360 and when I took another small block at a later date they said they never had torque plates so I had to thank them for the rip off
Posted By: Dart451
Re: 5 angles valve job near Iowa City / Cedar Rapids - IA - 07/27/19 05:34 PM
Layne Automotive in Fulton, Kind of a drive for you. Small shop that gets stuff done and good sponsor to Cordova Dragway.
Built me a stroker shortblock in couple weeks so I could make dragweek. this was first interaction with them. Since then had him rebuid my stock 383 for another car and a friends shortblock.
Posted By: furious70
Re: 5 angles valve job near Iowa City / Cedar Rapids - IA - 07/29/19 03:09 AM
There was a shop in maquoketa as well that competed in engine masters a couple times, can't think of the name...
Posted By: 360tripleblack77
Re: 5 angles valve job near Iowa City / Cedar Rapids - IA - 07/29/19 12:37 PM
Thank you Guys!!! I really appreciate your support with this question!