Moparts

ATI damper for RB with Indy timing cover

Posted By: Chargerfan68

ATI damper for RB with Indy timing cover - 06/23/19 01:24 AM

Anybody positive which ATI super damper i would need with the Indy cast timing cover with crank hub spacer? I thought it was the same one as for the jesel belt drive setup, but i want to make sure before i pull the trigger. Figured i’d check here with the experts first instead of calling and possibly waiting on hold.
Posted By: cudatom

Re: ATI damper for RB with Indy timing cover - 06/23/19 01:45 AM

ATI #917127E damper is the one I have.
Posted By: Chargerfan68

Re: ATI damper for RB with Indy timing cover - 06/23/19 03:28 AM

Originally Posted by cudatom
ATI #917127E damper is the one I have.


Thanks for the info up
Posted By: 69Mcode440

Re: ATI damper for RB with Indy timing cover - 06/24/19 01:58 AM

They have a chart on their website with the info you need.

Mike
Posted By: Chargerfan68

Re: ATI damper for RB with Indy timing cover - 06/24/19 02:35 AM

Originally Posted by 69Mcode440
They have a chart on their website with the info you need.

Mike


Yes, thanks. I did find that chart, but like in the past, i have purchased parts from company websites, and they did not fit right, or were incorrectly listed. I figured its best to ask the real deal racers here that built this combo. Thanks for pointing that out though. up
Posted By: pittsburghracer

Re: ATI damper for RB with Indy timing cover - 06/24/19 02:43 AM

I had to put a small shim that ATI offers behind my ATI damper with my Indy cover.
Posted By: Dduster

Re: ATI damper for RB with Indy timing cover - 06/24/19 10:29 PM

This ^^^^. Without the extra shim the damper will 'bottom'out' on the timing cover.
Posted By: Chargerfan68

Re: ATI damper for RB with Indy timing cover - 06/25/19 02:16 AM

Thanks so much guys. I will make sure i check clearance and use one. Great information that helps in case i missed that. up
Posted By: 69Mcode440

Re: ATI damper for RB with Indy timing cover - 06/25/19 03:31 AM

I bought the hub listed for use with the indy cover and just swapped it with the original hub on my ATI damper. Summit has them in stock.

Mike
© 2019 Moparts Forums