Wiper motor block off

I made some wiper motor block off plates a while back but I didn't have a gasket for them. Talked to Detroit Muscle and Jim made me some gaskets from 1/8 inch material. Now the plates will seal up the hole in the firewall. I made the first few plates from stainless but I think I'll switch to powder coated steel for the next batch.

A body only or is it one size fit all

I have no idea on that. I think most wiper motors are the same but I could be wrong. Wiper motors aren't really my thing.

Your'e going to have to paint that in matching body color. Interesting place for a MAP Sensor ...

Any disadvantages to aluminum? Most would be for race car applications and some are sticklers about weight.

I made one that pretty much looked just like these out of aluminum about 10 years ago. It worked fine.

Kydex works too...many different colors and thicknesses are available.

https://www.ebay.com/sch/i.html?_fr...t.TRS0&_nkw=kydex+sheet&_sacat=0

My son made his too. I’m glad some guys still do some of their on work instead of buying or paying someone to do it.

the only way i can play is to fab stuff myself. gotta make sure the docs and hospitals get their fair share.
having a 42 1/2yr machinist career helps, plus, it's fun to make stuff ! problem solving 101.