Posted By: Stanton
Indy EZ-1 different length head bolts ? - 04/27/19 09:51 PM
This came up a while back - searched for it but it must have been before the software update so can't find it now.
In the center row the heads take two different length bolts. Does anyone know if the longer bolts will fit the shorter holes or will they bottom out. Would prefer not to have to pull those out to check if I put them in the correct holes !!
In the center row the heads take two different length bolts. Does anyone know if the longer bolts will fit the shorter holes or will they bottom out. Would prefer not to have to pull those out to check if I put them in the correct holes !!