ARP cyl. head stud kit for Victor heads

Does anyone know a part# for cyl. head stud kit from ARP for an iron 440 megablock using Edelbrocks Victor 440 aluminum heads. Sounds simple, but even a call to ARP's tech dept. was really no help. Told me they could put together something if I could provide them with all the dimensions.They could find a bolt kit but not a stud kit. I have found stuff for aluminum Indy and edelbrock performer heads but not sure how they compare with the Victors. Also is the question of 12pt or hex head fasteners and socket clearance issues.Anyone on here done this before.This Victor thing is FULL of suprises!!! Thanks, Bill

Hughes lists an ARP stud kit for Victor heads on their web site... about $200.

I use a 5/8 plug socket with some of the outside ground off to fit in the head mostly by the rocker stand studs.I will look for the stud kit #

Thanks Brad, I don't know why I didn't check there first, thats where I got the heads, rockers and porting in the first place. The older ya get,the more brain farts ya have! Just checked Jegs and they sell the same part #145-4012 for $166 .Thanks,you guys, you always seem to come thru. Bill