Long w2 exhaust valve source

Anyone know where I can get a set of 3/8 stem 1.60 5.22ish valves from. I tried everywhere I can think of to get get them. Ferrea has non and will not be making any. Mopar Manley si all no good. The heads have new 3/8 guilds in them so I dont really want to go 11/32.

Manley will make them for you......... but it’s probably cheaper and quicker to just put guides in the heads and get 11/32 valves.

Ferrea

Ferrea F6137
CHRYSLER 340 & W2 (1955 - 2012) EXHAUST 6000 SERIES COMPETITION VALVES
340 & W2 (3/8)
Exhaust Valve
Head Diameter: 1.600
Stem Diameter: 3/8
Overall Length: 5.225
Tip Length: 0.225
References: 15 Degree Super Flo-W2

I tried to order from a few dealers and from Ferra directly. Those valves are no longer in stock. Was told they have no plans on making them again.

I honestly can’t blame them in 3/8 stem. Were the ones in the W2 econo heads the long length valves. If so let me know and you can have the set out of my cracked W2 heads.

Never mind I can’t help you. The intakes are 3/8 and the exhaust are smaller diameter. Oh well I tried

This place maybe?

https://revvalves.com/

Give Todd a call,he never ceases to amaze me!

http://www.mopartsracing.com/

Just heard back from manley they are going to make a run of 20 sets. so I have a set on the way.