magnum stroker truck oil pan

I have a 98 hot rod dodge truck with a stroker small block magnum i need a oil pan to clear the rods. Who makes one? Thanks John

Stock Magnum truck oil pan will.

Thats what I have, and 3&4 rods are hitting the pan.

Ball peen hammer

must be running stock rods?

That is the only time I had any clearance issues on one. I did just what was mentioned, little dings in I think it was the dipstick tube to get it all clearing properly. It was a balancing act for sure to get the rods to clear the tube and still get the dipstick to fit through. I think we may have slotted the bolt holes a little so we could bow out the side of the pan a tiny bit. I swore off trying to run strokers with stock rods after that and have never had a clearance issue since.