Posted By: MR_P_BODY
Need A Quick Check - 12/26/17 08:29 PM
I just did the CC for my head and bore and need
to have it checked to see if I'm right(getting
old sucks)
bore= 4.040
stroke= 3.79
I did the 1/2" down method and came up with 0cc
gasket dia= 4.170
gasket thickness= .044
true bore dia= 4.063
head CC= 65cc
zero deck with dome but came up to 0cc total
after the dishes
I came up with 11.78 compression
I use to run this engine with W-2 heads but I
will be running W-5s now.. looking for the comp
ratio
thanks
to have it checked to see if I'm right(getting
old sucks)
bore= 4.040
stroke= 3.79
I did the 1/2" down method and came up with 0cc
gasket dia= 4.170
gasket thickness= .044
true bore dia= 4.063
head CC= 65cc
zero deck with dome but came up to 0cc total
after the dishes
I came up with 11.78 compression
I use to run this engine with W-2 heads but I
will be running W-5s now.. looking for the comp
ratio
thanks