Where to find a 10" tubular fuel sending unit

Been seachin with no luck. Does anyone know where to purchase a 10" sending unit. Cell is 10" deep and need a sending unit that reaches the bottom. All i have found is 8" and 12" . doesnt anyone make a 10?

My understanding is that you can cut the 12" to length. Is the one you found adjustable at the sending unit? Mine is.

Give isspro a call.

I currently have an 8 in the cell. Doesnt look adjustable.

Ill check that out.

Isspro has them. Thanks

Mine has a screw on the top that adjusts it electronically.

Why dont you cut it to the length you need then
just move the card.. its simple and cheap

Not sure i understand. Mine is 8" and too short. If i slide the card down the float would not be able to slide to the end without falling out of the tube. The 10" is only $58 and an easy swap.

If the 10" will fit then use it
EDIT
I was thinking you had a 12" and needed a 10"..
its just tubing.. right.. with the card on it..
I assume this is 1/2" tubing

I think so Mike. Buying the 10" is the best way.