Posted By: superchuck
B&M flex plate question - 11/17/17 07:14 PM
With a 360 and using a B&M flexplate, do I need to have the weight welded to the convertor? Here is the flex plate in question.
https://www.summitracing.com/parts/bmm-10239/overview/Thanks
Posted By: A727Tflite
Re: B&M flex plate question - 11/17/17 07:33 PM
No weight. Read the testimonials in the ad from Summit. The cutout on he B & M should be 180 degrees from the weight on a production flexplate.
Posted By: superchuck
Re: B&M flex plate question - 11/17/17 09:17 PM
I read them, just wanted to make sure.
Posted By: A727Tflite
Re: B&M flex plate question - 11/17/17 10:53 PM
You'll be good with this plate. Bolt her up and let her rip.