Little w2 project

w2s getting little love.
CNC chamber done.
If Mopar would have moved plug location in this head would be a bad dude.








This is w8 chamber vs the w2 I just did.

15*, what is the rest of the combo?

Old school stuff getting some love. How's the iron treating ya!?

Will you be posting the flow #'s on these? Curios how they compare to mine. Jim

No flow numbers.
This is for limited dirt track rules.
No porting only blend of valve job and anything in chamber.
Flow numbers would not impress but chamber will help with power.
Rules are flat top piston 358" 60cc chamber.

How much extra power would a relocated plug be worth?
Is it possible?
Those look to be two different heads as one has the outer bolt holes..or is the one pic a comparason pic to a bigger head?-i guess w2's never had the outside bolt holes..

W-8 and W-2.

48° 47cc chamber?

Yes started as 47cc 48° heads.

Cool, I think those may have been mine at one point, is Todd B. involved in the project?

Are they modified for a 59* block?

They don't appear to be, check the push rod holes in the first pic

funny it almost looks like a small block head next to a big block head... more great work from Brett Miller