Posted By: Ted P
Flex plate for 99 hemi pro stock motor - 01/01/17 05:06 AM
Does anyone know of a company that sells a 142 tooth flex plate for the 99 hemi prostock motor? I'm fairly sure it's a 6 bolt chevy pattern on the crankshaft. I've found a starter that works with the flywheel when running a clutch.
Posted By: 340Cuda
Re: Flex plate for 99 hemi pro stock motor - 01/01/17 05:00 PM
If you end up having to have one made try Meziere. They made one for me (R-3 crank with Chevy bolt pattern). It was expensive, but it turned out to be less they work than they estimated and they sent me a refund check!
How many places would do that?
Good Luck!
Bill
Posted By: OUTLAWSSAA
Re: Flex plate for 99 hemi pro stock motor - 01/01/17 07:02 PM
Hey Ted, are you going hemi now?
Posted By: Ted P
Re: Flex plate for 99 hemi pro stock motor - 01/01/17 07:24 PM
I'm gathering information for a possible switch to a 99 hemi.
Posted By: PlumCrazyCharger
Re: Flex plate for 99 hemi pro stock motor - 01/01/17 09:09 PM
We all want to grow up to be like Hemi Don.haha
Maybe send Allen Johnson or Gaines an email. V is selling a bunch of inventory. We bought some parts from him last month.
Posted By: OUTLAWSSAA
Re: Flex plate for 99 hemi pro stock motor - 01/02/17 12:44 AM
I was just checking,because I don't know if Ted is ready for hemi power. He's used to running a wedge and now he wants to hang out with the big boys. LOL
Posted By: HR3128
Re: Flex plate for 99 hemi pro stock motor - 01/02/17 01:00 AM
Some place to check is Quick Time. They makes all kinds of flexplates. I did not see anything with 142 teeth ring gear.
They made one for me (R-3 crank with Chevy bolt pattern).
This one works if for an R-3 crank with Chevy bolt pattern and a GM convertor.
http://www.jegs.com/i/Quick-Time-Bellhousing/698/RM-946/10002/-1
Posted By: Leon441
Re: Flex plate for 99 hemi pro stock motor - 01/02/17 05:02 AM
946 is chevy crank flange 130 tooth with 3 bolt gm converter 10.5" pattern.
947 is 6 bolt mopar
949 is 8 bolt 426 hemi pattern also used on many race cranks.
I try to keep all these in stock.
Posted By: dafixr
Re: Flex plate for 99 hemi pro stock motor - 01/02/17 05:35 PM
Ted
Check with Big Drag he was running a Reactor wheel with a glide, he may have info
Posted By: Al_Alguire
Re: Flex plate for 99 hemi pro stock motor - 01/02/17 09:21 PM
We had a Reactor on ours..
Posted By: 340Cuda
Re: Flex plate for 99 hemi pro stock motor - 01/02/17 11:18 PM
Some place to check is Quick Time. They makes all kinds of flexplates. I did not see anything with 142 teeth ring gear.
They made one for me (R-3 crank with Chevy bolt pattern).
This one works if for an R-3 crank with Chevy bolt pattern and a GM convertor.
http://www.jegs.com/i/Quick-Time-Bellhousing/698/RM-946/10002/-1 I am using a 904 and matching converter.
Thank,
Bill
Posted By: keefe
Re: Flex plate for 99 hemi pro stock motor - 01/04/17 03:42 AM
Hi Ted how are ya.. I'll give ya a "BUMP" back to the front page...
keefe
Posted By: birdtracker
Re: Flex plate for 99 hemi pro stock motor - 01/04/17 04:14 AM
try these people----
http://www.reactorproducts.com/I only know one person who is using their product. Its around 1400 h.p naturally aspirated. Same part has been in there for 4 years. Birdtracker
Posted By: Ted P
Re: Flex plate for 99 hemi pro stock motor - 01/04/17 04:09 PM
His has the chevy bolt pattern
Posted By: 340Cuda
Re: Flex plate for 99 hemi pro stock motor - 01/04/17 04:17 PM
try these people----
http://www.reactorproducts.com/I only know one person who is using their product. Its around 1400 h.p naturally aspirated. Same part has been in there for 4 years. Birdtracker
I had a very poor experience with these folks trying to get a flex plate made. I sent them a new SFI Mopar flex plate requesting the equivalent plate but with a Chevy bolt pattern, this was at their request. They never could deliver and I never could get them to return the flex plate. After many emails and phone calls I just gave up. Seems like a good guy over the phone but he must be terribly disorganized.
Your milage may vary,
Bill
Posted By: keefe
Re: Flex plate for 99 hemi pro stock motor - 07/07/17 09:46 PM
Hi Ted (sorry just saw this) will PM you...
Keefe