Anyone know of any machine shops in the Midwest area (as close as possible to Kansas City) that are reputable for Mopar stuff? Like the ability to prep a Hemi block, Bush lifter bores, etc...
I would recommend Mid America Racing Engines. Dave built my 505 cubic inch max wedge engine, dyno tested at 620 hp/tq on pump gas in his shop. Photos of my engine are shown on his website photos. I drove back to Iowa from Utah to have Dave machine, assemble, dyno my engine, I provided all the parts. He is extremely easy to deal with, no attitude at all. Dave is also very knowledgable, many years of experience with Mopars, and all other types of engines. His prices are very reasonable also, call around to compare. He won the mopar muscle magazine engine challenge a few year back with a stroker big block. He also did very well with the Hemi, budget big block, and small block engines he build other years for the challenge. I included a few links below.
Mid America Racing Engines.
1945 West 18th St
Washington, IA 52353
319-653-6282
Dave Bruns-Owner/Engine Builder
http://www.midamericaracingengines.com/http://www.midamericaracingengines.com/gallery.htmlhttp://www.hotrod.com/articles/mopp-0703-2006-mopar-engine-challenge/http://www.hotrod.com/articles/mopp-1202...gine-challenge/http://www.hotrod.com/articles/mopp-0603-2005-mopar-muscle-engine-challenge-results/http://www.hotrod.com/articles/mopp-0602-2005-mopar-hemi-engine-challenge/#mopp_dyno_web_05_z