67 B-Body fiberglass REAR bumper

Looking for a rear fiberglass bumper for my 67 project. Fronts I can find...does anybody make the rear?

i just messaged a friend with a 67 if he has one on his, if he dose i be leave it may be from ws in astabula ohio

VFN fiberglass

Mine came from there for the coronet. They needed very little work before painting.

We used the glasstek one. sand and paint, very nice stuff.

http://marktesting.glasstek.com/products/plymouth/belvedere/

This car is far from Yuck, no pun intended. It is beautiful. Best in finding the bumper, though the rear should have some ballast to it.

Weight is weight. Take it out anywhere you can.

the reason for the glass rear is that there is nothing left of the factory rear frame. I just thought I'd be easier and cheaper to get a glass bumper. I'll get a matching front, paint them and roll.

Ah, gotcha.

Beautiful car!

That's not necessarily true. When I built my car years ago I thought the same thing. After years of racing on bad to mediocre tracks. I decided to try and get the front to rear weight % better. So I undid the mistakes that I made when I built the car. I started by putting a glass rear window back in, then I put a steel bumper with all the brackets back on. And last I put a steel decklid back on to get to 54% on the front.