Demon carb bowl repair

I have a Mighty Demon with stripped threads on the fuel bowl inlet threads. This is a 9/16-24 thread and I cant seem to find a helicoil that size. Is there something available or do I just replace the bowl?

Nappa has them

Holley sells a kit too but it's outrageous... Just pick the stuff up at napa that they call for in the kit

https://m.summitracing.com/parts/hly-26-...CFUxLDQodE6YDRg

I'm looking to repair where the fuel supply line fitting screws into the bowl.

I would replace the bowls, get a pair of the QF sight glass bowls. All the float hardware transfers over.

is there even enough meat there if you do find a h-coil?

Only way to go and those Demon bowls are HHEEAAVVYYY...........

I went ahead and ordered the bowl. Thanks