Lightweight complete headlight assemblies

Working on a 65 valiant that the prior owner cut out the headlight buckets, welded in block off plates and put on headlight stickers. Im looking for a "complete" headlight assemblies I can mount in place. Looked through summit and various other sites and found replacement bulbs but looking for 7" single headlight with high & low beam. Any ideas?

i was thinking about trying to fit these on an older car, i had them on a vw once.

http://www.germanautoparts.com/productdisplay/50601

Look at a street rod magazine. They have the try bar design with built in turn signals.

I used jeep wrangler headlight assemblies in the barracuda. Took a while to get them placed properly, but only required 3 holes and a little bit of grinding.
https://www.amazon.com/Omix-Ada-12402-03...p+wrangler+2000

I think at the time I bought them they were $30 a piece but should be able to get from a salvage yard

Go to eBay and punch in 7" round headlight.

This ^ or check motorcycle parts.There are plastic housings for H4 bulbs that will be light weight. ~RT

I was running these:
https://www.amazon.com/Crystal-Clear-H6024-Headlights-Non-Sealed/dp/B006WEG4JE

Now I am running these:
https://www.amazon.com/Truck-Lite-27270C-Headlamp/dp/B007K8AA7I