Moparts

CalTracs questions

Posted By: HOTHEMI

CalTracs questions - 09/30/16 11:56 PM

I have a E-body Challenger with S/S springs the have been moved in using the MP kit with offset hangers and shackles..does Caltracs make a setup for the shorter front spring segment to replace the S/S springs and snubber ?
Posted By: lockjaw-express

Re: CalTracs questions - 10/01/16 12:00 AM

Calvert will custom make just about anything you want...to a point.

They are very helpful on the phone, unlike a vendor in Indianapolis...


BR, Mark
Posted By: justinp61

Re: CalTracs questions - 10/01/16 12:18 AM

Aren't the springs A body length?
Posted By: slantzilla

Re: CalTracs questions - 10/01/16 01:13 AM

They will probably tell you not to use S/S springs with their bars. At least they told me that when I bought mine.
Posted By: justinp61

Re: CalTracs questions - 10/01/16 01:53 AM

Originally Posted By slantzilla
They will probably tell you not to use S/S springs with their bars. At least they told me that when I bought mine.


He's looking to replace his ss springs and snubber.
Posted By: Dragula

Re: CalTracs questions - 10/01/16 02:00 AM

Originally Posted By HOTHEMI
I have a E-body Challenger with S/S springs the have been moved in using the MP kit with offset hangers and shackles..does Caltracs make a setup for the shorter front spring segment to replace the S/S springs and snubber ?


Yes....And they can taylor them to the ride height you want.
Posted By: BradH

Re: CalTracs questions - 10/01/16 02:21 AM

Originally Posted By Dragula
Originally Posted By HOTHEMI
I have a E-body Challenger with S/S springs the have been moved in using the MP kit with offset hangers and shackles..does Caltracs make a setup for the shorter front spring segment to replace the S/S springs and snubber ?


Yes....And they can taylor them to the ride height you want.

20" front segments, instead of 22". It's not ideal IMO, but I've run it, too.
Posted By: Tig

Re: CalTracs questions - 10/01/16 09:23 PM

Originally Posted By HOTHEMI
I have a E-body Challenger with S/S springs the have been moved in using the MP kit with offset hangers and shackles..does Caltracs make a setup for the shorter front spring segment to replace the S/S springs and snubber ?

Yes, thats the same as ours, works best with a DA rear shock though
Posted By: Bigbeep

Re: CalTracs questions - 10/02/16 05:17 AM

Yep, calvert springs with 20" front segment and cal tracs. Beep

Attached picture PART_1475377423347_Classicwheelie2015.PNG
© 2024 Moparts Forums