Shout out to AJ Casini and Bob George!

Big thanks for the help getting the parts together for the new motor and the advice on the cam change. While BGR didn't build this motor , once again I wouldn't hesitate in the least to have them build one for me!

Now the results.... I haven't ran it off the stop yet since the first time out was this past weekend at the IHRA divisional at Keystone...but...in rather average weather the car ran just shy of 150mph on the stop. I'm sure I will see low 150's in better air. All in all very happy with the results.

They are both top notch people!!

Congrats, what is your previous best and what are the engine specs Eric ?
Mick

Bob is one of a handful of guys on here I'd like to sit down with a cool beverage with and shoot the breeze.

Yep, Bob, AJ, Donny and the whole crew in 84 Pa. have been a huge help to us.
They did the ladder bars in the car last year... wow what a nice job.
They've also helped me a lot giving me guidance while I rebuild the motor.

Thanks guys!

Mick,

499" low deck

Molnar crank and rods
JE flat tops
CNC 295 Indy SR's
Comp MM305S-10
Harland Sharpe 1.5's
AED 1000cfm 4150
Indy intake
UCC 5800 stall
4.56 gear

somewhere between 12-12.5 :1

I hope to see 5.40's or maybe 30's in the 1/8th and 8.60's in the 1/4 at low 150's

BOB and AJ are good folks...they just helped me out with a new Tunnel Ram..called on Tuesday it arrived on Thursday. Gotta like that!