Any pics of your chute mounts

Lets see your launcher style chute mounts. I have a idea how it should look just would like to see how yours are done.

Thanks,
Donald

here you go

Here's a bump for you, must not be any Mopars fast enough to need a chute.

You'll have to go to YB to see some.

Mike Gray

Sorry, no pic but mine come through the fascia, with
the main tube welded to the cross bar at the back of
the chassis with 2- 5/8 tubes welded to the same cross
bar to take the side loading(one on either side of
the main at about 45* angle). The main tube should be
at the height of your CG to pull straight without
any undo loading or un-loading of the chassis

Quote:

---

Sorry, no pic but mine come through the fascia, with
the main tube welded to the cross bar at the back of
the chassis with 2- 5/8 tubes welded to the same cross
bar to take the side loading(one on either side of
the main at about 45* angle). The main tube should be
at the height of your CG to pull straight without
any undo loading or un-loading of the chassis

---

Thanks for the pic.

Mr.P that is good info Thanks