Help Me Pick My Cam on My New Bullett

You guys keep busting my chops about my baby solid roller so spec me one.... I currently run a comp cams solid roller 248/254 @ .050 and .640 net lift with the harland 1.7's... the gentlemen who help me build my motor originally has since passed away and never got to see the car run and I belive all his measurements are for my mill but cannot confirm nor deny it yet.... I would like to stay in abou the same lift range (.650) with my 1.7'

new heads coming real soon

MCH CNC'd Indy EZ's 2.19*1.81 and compression is 11.1 with a felpro 1009... I am sure of these specs piston is in the hole .013
they are J&E notched pistons.... how much lift I can go is undertermined yet... but i would like to stay close to my lift now anyway..

some i have found ???

260/266 with .588/.597 lift .398 lobe lift

Bullet Cams
R297/385 297 262 170 .385 .013 CRA
R299/385 299 264 171 .385 .013 CRA
R301/385 301 266 173 .385 .013 CRS

get ahold of Dwayne (fast68plymouth) he can spec you out a cam that will work.

I think the best way is getting someone that knows about cams and how they work way better than the average guy is the best way. I had Straightline spec out my cam for my big block, and RyanJ work with Bullet for the cam for the small block. Call a cam company talk to their tech guy and have them spec you out a cam. You don't have to buy it, but it will give you the best idea.

Quote:

---

get ahold of Dwayne (fast68plymouth) he can spec you out a cam that will work.

---

Call Dwayne and get it right the first time. CHIP