Moparts

shifter question.

Posted By: TrxR

shifter question. - 05/18/16 06:05 PM

Ok guys i was watching street outlaws the other night and have been noticing that alot of the shifter arent solidly mounted. Is there a reason for this. They seem to rock back and forth.

Thanks
Posted By: Thumperdart

Re: shifter question. - 05/18/16 06:17 PM

Originally Posted By TrxR
Ok guys i was watching street outlaws the other night and have been noticing that alot of the shifter arent solidly mounted. Is there a reason for this. They seem to rock back and forth.

Thanks


Was thinking the exact same thing............. shruggy
Posted By: Cab_Burge

Re: shifter question. - 05/18/16 06:20 PM

Maybe it is because of the air shifters there using confused Mine is mounted solid so who knows shruggy
Posted By: MR_P_BODY

Re: shifter question. - 05/18/16 06:21 PM

Originally Posted By TrxR
Ok guys i was watching street outlaws the other night and have been noticing that alot of the shifter arent solidly mounted. Is there a reason for this. They seem to rock back and forth.

Thanks


Its pinned on... so they can pull the tunnel easy..
I did the same thing... its a tube with a slide in tube
with a pin holding the tubes.. you can see the way I did it
wave

Attached picture DSC00016.JPG
© 2024 Moparts Forums