SB Distributor hold down options...who makes a billet one?

Just put a belt drive on my R3, so moving the cam sync to the front cover. Already dry sump, so don't need that hole for anything! Ordered the ARE AR364 to plug the distributor hole and figured I'd just order up a billet hold down....searched......then I remembered I have a Mopar. I cannot find anything but stock steel hold downs. Does anyone make a billet piece?

I just use a chrome hold down.. I never seen
a billet one

https://csr-performance.com/shop/product.da/csr672-distributor-hold-down---chrysler-small-block-(all-a-motors)

That looks identical to my steel/chrome one
EDIT
I had to grind out the center section for a dist
to fit.. thats what I have on my 416 now

Awesome, you are the man! Thanks again! Wish ARE would put an ear on the plug, be nice to just use one piece.

PM me, I have an extra titanium holddown for sale.
R.

I use the CSR hold down also, but with a MSD dizzy you will have to file down that middle hump a little to clear the dizzy base.

Jegs makes one also

Could you tap the plug and fab your own ear?

Or, a self-expanding rubber plug for about 1% as much money.
But then, you don't get to tell people about it.