Moparts

It fits...barely: car is complete and ready for dyno

Posted By: Edge

It fits...barely: car is complete and ready for dyno - 01/30/16 09:36 PM

Decided to pull the B1 and go forward with the hemi, rack has to repositioned and new fuel tank built but progress is being made, apsects of the build have gone beyond my skills now and the fabricator working on the car is doing great work I will post progress pictures if there is interest
Posted By: DaytonaTurbo

Re: It fits...barely - 01/30/16 09:38 PM

Pictures you say...? Of course!
Posted By: Edge

Re: It fits...barely - 01/30/16 10:04 PM

Mid plate has been milled to clear right bank and started mounted to mid plate

Attached picture IMG_0674.jpg
Attached picture IMG_0676.jpg
Posted By: sgcuda

Re: It fits...barely - 01/30/16 10:16 PM

Man, that thing is wall to wall engine. 2 BLOWERS??? Should be a ride to remember.
Posted By: Edge

Re: It fits...barely - 01/30/16 10:23 PM

Just a plenum going on top of the manifold so one centrifugal blower. Yeah its really a tight squeeze, just glad it fits
Posted By: Dave Hall

Re: It fits...barely - 01/30/16 11:28 PM

Nice choice with the Hemi/Procharger. Hold on! That thing is going to fly!
Posted By: hudsonhornet7x

Re: It fits...barely - 01/30/16 11:29 PM

Wow that thing is killer!
Posted By: ProSport

Re: It fits...barely - 01/30/16 11:40 PM

Awesome
Posted By: SpareParts

Re: It fits...barely - 01/31/16 12:12 AM

Very cool. Can we see more of the car? Do you have a class in mind?
Posted By: Edge

Re: It fits...barely - 01/31/16 12:49 AM

Originally Posted By SpareParts
Very cool. Can we see more of the car? Do you have a class in mind?


Not the most recent pic but what I have on the computer, have posted progress pics of the car in the past but the engine switch is the most recent update

Attached picture IMG_1410.jpg
Posted By: Edge

Re: It fits...barely - 01/31/16 12:55 AM

More recent with the B1 engine that I am likely selling

Attached picture IMG_0019.jpg
Posted By: 451Guy

Re: It fits...barely - 02/02/16 05:03 AM

Hopefully when you are done there will still be some cement on the starting line at Castrol... Looking forward to seeing another kick butt mopar at our track!
Posted By: hemi-itis

Re: It fits...barely - 02/02/16 07:08 AM

Hemi's LOVE boost!! grin Tryin to run with GO GREEN??
Posted By: Stroker Scamp

Re: It fits...barely - 02/02/16 07:25 AM

Boy you are not foolin around!! looks great
Posted By: 72sat

Re: It fits...barely - 02/02/16 07:53 AM

nice ride. this brings up a QQQQQ I've been thinking about. will BAE heads fit on a factory 440 block?
Posted By: hemi-itis

Re: It fits...barely - 02/02/16 02:45 PM

That is NOT a stock block,,,,,,wonder if it's a water block,,,,,,,
Posted By: Edge

Re: It fits...barely - 02/03/16 03:57 AM

Originally Posted By hemi-itis
That is NOT a stock block,,,,,,wonder if it's a water block,,,,,,,


Block is solid billet BAE block (no water passages) same with the heads.

Only really interested in getting this project running and at the track hopefully this summer at this stage no ET target in mind would just like to have it go point a to b as a start.
Posted By: Edge

Re: It fits...barely - 02/03/16 04:08 AM

The heads will only work on hemi block ( differnt head stud configuration than ) as well much larger head stud diameter.
Posted By: DusterDave

Re: It fits...barely - 02/03/16 10:04 PM

Originally Posted By 72sat
nice ride. this brings up a QQQQQ I've been thinking about. will BAE heads fit on a factory 440 block?
Even if those heads could be made to fit, that stock 440 block would be reduced to shrapnel about 1 second into the run. LOL
Posted By: Thumperdart

Re: It fits...barely - 02/04/16 12:11 AM

Originally Posted By Edge
Mid plate has been milled to clear right bank and started mounted to mid plate



Just plain mean looking.........good luck man..... drool
Posted By: astjp2

Re: It fits...barely - 02/04/16 04:21 AM

I love the look of the blower and mounts, do you have more info on that?
Posted By: brownout

Re: It fits...barely - 02/06/16 08:20 AM

I would like to hear more on the combination and the car specs... also what are your goals? Looks good so far.
Posted By: Bigcube

Re: It fits...barely - 02/06/16 04:08 PM

Very nice! beautiful car too.
Posted By: gregsdart

Re: It fits...barely - 02/06/16 05:14 PM

Originally Posted By DusterDave
Originally Posted By 72sat
nice ride. this brings up a QQQQQ I've been thinking about. will BAE heads fit on a factory 440 block?
Even if those heads could be made to fit, that stock 440 block would be reduced to shrapnel about 1 second into the run. LOL

No burnout then??
Edge, love the car.
Posted By: Edge

Re: It fits...barely - 02/11/16 04:14 AM

Engine is a BAE -.500 billet block with Brad VI heads 471 CID
All pretty standard alcohol engine internals
I had the mechanical injection system flowed by Travis Quillen
Transmission is a Lencodrive unit set up as a 3 speed ( decided we did not need the fourth gear).
Rear end is M/W aluminum modular unit.



Attached picture IMG_1875.jpg
Posted By: Edge

Re: It fits...barely - 03/09/16 07:29 AM

A few more changes to the car

beefier motorplate

Attached picture IMG_0678.jpg
Posted By: Edge

Re: It fits...barely - 03/09/16 07:31 AM

new crank trigger set up

Attached picture IMG_0679.JPG
Posted By: Scojodak

Re: It fits...barely - 03/13/16 01:11 AM

Simply Bad To The Bone!
Posted By: 72Swinger

Re: It fits...barely - 03/13/16 02:17 AM

Just plain stupid brutality going on here. The starting line guys will feel violated....
Posted By: Edge

Re: It fits...barely - 06/14/16 06:01 AM

Zoomies !

Attached picture IMG_9671-1.jpeg
Attached picture IMG_4462.jpeg
Posted By: Edge

Re: It fits...barely - 06/07/17 05:02 AM

Hogan intakes are like jewellery for engines I cant stop staring at it, its a slow process getting this together but will be worth the wait

Attached picture hogan bae.jpg
Posted By: Edge

Re: It fits...barely - 06/07/17 05:55 AM

oil filter, fuel and vent tanks added

[/quote]

Attached picture duster fuel and vent tanks.jpg
Posted By: GTX MATT

Re: It fits...barely - 06/07/17 06:34 AM

Holy crap, what are you expecting for power out of this thing?
Posted By: racerx

Re: It fits...barely - 06/07/17 11:37 AM

You guys are building some nice cars smoke
Posted By: Edge

Re: It fits...barely - 06/08/17 01:43 AM

Originally Posted By GTX MATT
Holy crap, what are you expecting for power out of this thing?


Should make 1800 hp without leaning on it very much, our goal is to get it on a chassis dyno by the fall.
Posted By: dthemi

Re: It fits...barely - 06/08/17 01:42 PM

That should definitely get the job done, and then some. Nice work too.
Posted By: Edge

Re: It fits...barely - 11/21/17 02:10 AM

A few more progress pics, charge tube and mag will just be above hood line, pretty much everything is now mounted in engine bay and vent tank has been moved to rear of car

Attached picture duster side.jpg
Attached picture duster.jpg
Posted By: Cab_Burge

Re: It fits...barely - 11/21/17 02:25 AM

Which heads and rocker gear to you go with?
I've seen some awesome looking BAE race parts on a friends BAE #8 race motor bow up
OOPS, I just read the second page blush
Building new combinations of race parts like your doing take time, effort and money thumbs
Keeping it at or below 1800 HP is going to be very hard, me thinks work
Posted By: ozymaxwedge

Re: It fits...barely - 11/21/17 04:00 AM

up up up up up up Stunning
Posted By: crlush

Re: It fits...barely - 11/21/17 03:20 PM

Holy s#$t that is bad a$$! drool
Posted By: gregsdart

Re: It fits...barely - 11/22/17 04:21 AM

If it were mine I would be buying spare underware blush
Posted By: ozymaxwedge

Re: It fits...barely - 11/22/17 04:24 AM

Yes,,I want one.
Posted By: Edge

Re: It fits...barely - 11/22/17 04:50 PM

Thanks, this has taken more time and money than I could have imagined when I started to rebuild but I am still determined to try and get it right.
Posted By: bigblockrik

Re: It fits...barely - 11/23/17 12:04 AM

I just got moist wow !
Posted By: Edge

Re: It fits...barely - 01/27/18 08:29 PM

All the bare aluminum and steel is back from being anodized or plated and the 12 point black ARP hardware throughout car. These little details add some expense but hopefully add to the finish of the car.

Attached picture 53850123323__5C125639-3772-4BD1-9124-7ED4D55B5310.jpg
Attached picture 53850126341__0BA1DD3F-04E9-4C63-8F90-2F75E769923D.jpg
Posted By: Edge

Re: It fits...barely - 01/27/18 08:36 PM

Chance converter installed in Bonifante can for the lencodrive all ready to go into car.

Attached picture converterinbell.jpg
Posted By: Edge

Re: It fits...barely - 02/07/18 03:43 AM

More progress pictures just a few more lines and wiring remain.

Attached picture frontview.jpg
Attached picture intakecharge.jpg
Attached picture zoomieexit.jpg
Posted By: J_BODY

Re: It fits...barely - 02/07/18 04:04 AM

OCD guy wonders if you can get MSD decals for that ignition box so they're not upside down? laugh2

What a Beautiful build!!! can't believe this is into page 3 and I just noted it!
Posted By: hemi-itis

Re: It fits...barely - 02/07/18 06:02 AM

I'm smellin low 4's for sure!
Posted By: OhioMopar

Re: It fits...barely - 02/07/18 06:11 AM

Wow! That will get some adrenaline flowing.
Posted By: sgcuda

Re: It fits...barely - 02/07/18 01:52 PM

Very cool!
Posted By: I_bleed_MOPAR

Re: It fits...barely - 02/07/18 03:23 PM

drool

Very nice. up



Tim
Posted By: pittsburghracer

Re: It fits...barely - 02/07/18 03:36 PM

Beautiful car and should be very fast but I gotta ask as have others. What class are you building the car for?
Posted By: Edge

Re: It fits...barely - 02/08/18 02:25 AM

Building the car for a couple of classes in our area Top Eliminator class where dragsters and door cars run under T/S and T/D rules and a Door Slammer class that runs on a .400 tree with a min dial. So basically we will start out running as a pretty quick bracket car. Down the road who knows ?
Posted By: Edge

Re: It fits...barely - 02/08/18 02:26 AM

Originally Posted By J_BODY
OCD guy wonders if you can get MSD decals for that ignition box so they're not upside down? laugh2

What a Beautiful build!!! can't believe this is into page 3 and I just noted it!



Yeah the points box upside down drives me a little crazy as well but I will have to learn to live with it
Posted By: ozymaxwedge

Re: It fits...barely - 02/08/18 03:53 AM

Very envious mate, awesome.
Posted By: 590 Challenger

Re: It fits...barely - 02/08/18 04:36 AM

I haven't seen this thread before, I love your build. Looking forward to seeing more, best of luck with her
Posted By: Dragula

Re: It fits...barely - 02/08/18 04:48 AM

Originally Posted By Edge
Chance converter installed in Bonifante can for the lencodrive all ready to go into car.


Starter's in the wrong position!
Posted By: Edge

Re: It fits...barely - 02/14/18 04:24 AM

More progress, fuel tank back from anodizing and oil lines installed

Attached picture 53988990469__35FCA05E-8E7F-4A83-842E-CA5D82EE78EB.jpg
Posted By: Edge

Re: It fits...barely - 02/14/18 04:29 AM

Originally Posted By Dragula
Originally Posted By Edge
Chance converter installed in Bonifante can for the lencodrive all ready to go into car.


Starter's in the wrong position!


its just an optical illusion took picture in a mirror
Posted By: 4mopower

Re: It fits...barely - 02/14/18 12:30 PM

Very cool build!!!! Good luck with it!
Posted By: racerx

Re: It fits...barely - 02/14/18 12:45 PM

One of .... the best build on here thumbs
Posted By: BobR

Re: It fits...barely - 02/15/18 09:34 PM

What's your timeline for completion?
Very nice indeed.
Posted By: megajoltman

Re: It fits...barely - 02/15/18 10:15 PM

Wicked!
Posted By: Al_Alguire

Re: It fits...barely - 02/15/18 10:25 PM

BASA$$ for sure...
Posted By: Forest

Re: It fits...barely - 02/15/18 10:34 PM

Bad to the bone! Dumb question, but is this the same car that was originally built by JCR Chassisworks? Also this thing outta run bottom 6's huh?
Posted By: Edge

Re: It fits...barely - 02/16/18 02:45 AM

Originally Posted By BobR
What's your timeline for completion?
Very nice indeed.


Previous timeline was last summer ! However everything looks very positive for this summers/
Posted By: Edge

Re: It fits...barely - 02/16/18 03:01 AM

Originally Posted By Forest
Bad to the bone! Dumb question, but is this the same car that was originally built by JCR Chassisworks? Also this thing outta run bottom 6's huh?


Different car than the JCR build...that is a very nicely built car for sure. Even considering that this is the same car I will take as a complement. The way I have supercharger pullied we wont be making enough power for bottom sixes and the driver is not ready for that matter. We will try to take it one step at a time.
Posted By: Biginchmopar

Re: It fits...barely - 02/16/18 03:11 AM

All under the hood up

Bada$$! beer
Posted By: Edge

Re: It fits...barely - 02/23/18 03:16 AM

Injectors have been cleaned, flowed and installed ( 210's and 700's), car will idle and run part throttle on the 210's. Fuel lines and oil lines in place. Injector harness is next.

Attached picture 54043453593__E8EB6BA6-CBBA-4BF4-BE27-09A8938E193E.JPG
Posted By: Edge

Re: It fits...barely - 02/24/18 06:29 PM

Line lock and brake lines now installed

Attached picture DSC04709.jpg
Posted By: FastmOp

Re: It fits...barely - 02/24/18 08:00 PM

Getting close. Can't wait for some vids
Posted By: Edge

Re: It fits...barely - 04/03/18 01:34 AM

Getting closer !

Vent tank and lines running from burndown tubes to the back of the car. Decided better to have any oil behind the rear wheels and I see more cars with the vent tank in the rear more recently.

Should be firing car up pretty soon !

Attached picture 54437291972__C5D61A06-C713-4F34-B212-9ABCF88C95E2.JPG
Posted By: racerx

Re: It fits...barely - 04/03/18 12:28 PM

smoke
Posted By: 80arrow

Re: It fits...barely - 04/04/18 12:57 AM

What size tubing are you using for your breathers going to your vent tank? Where did you get it? I'm going to do a similar set-up in my Dart.
Posted By: Edge

Re: It fits...barely - 04/04/18 05:01 AM

For the vent tubing 1 1/4 inch is specified by NHRA for blown alcohol. NHRA also lists some different types of "approved vent tube". The spec tubing is available on line for example at quartermax for $11 -$20/foot. Spent way too much time looking for alternatives as well 1 1/4 is not a popular ID. Good vibrations sells a simple PVC hose however PVC hose does not stand up well to methanol or oil. The line I used is PVC with a urethane coating on the inside it is actually air seeder hose that I had laying around right under my nose the whole time. In theory it should stand up well but we will see. The urethane coating is intended for reduce wear flowing abrasive material in the hose. You can buy it at most farm supply stores. If I recall this came from the John Deere dealership.
Posted By: Edge

Re: It fits...barely - 04/04/18 05:19 AM

Here are a few more pics of the routing of the vent lines from the burn down tubes, through fire wall and finally along frame rail. My fabricator built a catch can at the low point of the tubing so any oil that accumulates in the lines can be drained from the system.

Attached picture 54386402913__3E59BA26-2527-4444-B9B6-449E6D3B0247.jpg
Attached picture 54386401862__2A6CD662-A2AF-4D3B-9185-B832C4C9C69A.jpg
Attached picture 54395771381__345CB999-629E-46DB-AA74-D830F5C2423C.JPG
Posted By: Edge

Re: It fits...barely - 04/04/18 05:20 AM

I have no idea why some of these photos are flipped when I upload them ?
Posted By: 80arrow

Re: It fits...barely - 04/07/18 02:27 PM

Thanks for the info. I'd planned on running -12 from the valve covers to a T, then 1 1/4" from there back to my tank. Looks like I'll have to rethink that, lol. Very nice set-up you have. Can't wait to see how it runs.
Posted By: Edge

Re: It fits...barely - 04/08/18 05:27 AM

Fire bottles installed

Attached picture 54480968349__649C333A-A8CE-4BC9-8FFA-2006F7E61993.jpg
Posted By: Edge

Re: It fits...barely:Air launchers - 04/08/18 06:34 PM

Chute launchers mounted

Attached picture 54489127413__C322E265-9096-48CD-86E6-B55963832EA3.jpg
Attached picture 54489124560__2A4FA543-C287-4C08-B9BA-5637D153D9F4.jpg
Posted By: Dave Hall

Re: It fits...barely:Air launchers - 04/08/18 07:04 PM

I can't wait for you to get to the track! Thanks for the killer updates! One FYI with the air launchers if you've never used them. Make sure that no part of the bag can get hooked around that push disc as it will bend the plunger upon deployment. I have had it happen and was able to bend the plunger back with it still on the car. The first time it happened it was pretzel salad and we had to replace it. The plungers sometimes hang out after a run and with a little twisting and hand smacking will return back down. Make sure if you have to twist it that the nut is tight enough to turn the plunger and not just the disc. The bags get torn up pretty easily and we've used 200mph tape on them for awhile until they were too tattered and were replaced. They are simple to pack and I've actually got them ready to go with no string. I highly advise getting used to chucking one or both of them out BEFORE the stripe.
Posted By: Edge

Re: It fits...barely:Air launchers - 04/09/18 12:13 AM

Thanks for the advice, very helpful.
Posted By: Edge

Re: It fits...barely:Valve Covers - 05/26/18 11:15 PM

To finish off the engine bay got the valve covers the hydrographics treatment. Have had no time for the car recently but will get things wrapped up on the build this summer.

Attached picture valve covers.jpg
Posted By: Dave Hall

Re: It fits...barely:Valve Covers - 05/27/18 02:22 AM

Nice! Keep going!
Posted By: ozymaxwedge

Re: It fits...barely:Valve Covers - 05/27/18 02:39 AM

Just shorted out the key board drooling
Posted By: hemi-itis

Re: It fits...barely - 05/27/18 04:04 AM

Must be a street car,the radio is still there.Just need some lightweight speakers. realcrazy
Posted By: racerx

Re: It fits...barely - 05/27/18 04:06 PM

Always enjoy Deep long bills like this ,gives me a reason to keep returning to moparts.
Posted By: Edge

Re: It fits...barely - 06/02/18 08:07 PM

Originally Posted By hemi-itis
Must be a street car,the radio is still there.Just need some lightweight speakers. realcrazy


Things are not always as they appear... did not take too long to glue together a nice face plate to give the appearance of a radio. If I had a heater control I would try to do the same as well. I like it better than a gaping hole in the dash. Will be removing the gauges from the dash as they are no longer needed as well.
Posted By: hemi-itis

Re: It fits...barely - 06/03/18 04:55 AM

Still street driving need valid stickers!
Posted By: Edge

Re: It fits...barely: back home and complete Dyno next ! - 01/12/19 03:06 AM

Its been two years since we started to shoe horn this hemi into the duster. Really happy to get to this point with the car. Next step is getting a tune on the car on the chassis dyno on Jan 22. I

Attached picture jan 11 duster.jpg
Attached picture jan 11 duster 2.jpg
Attached picture IMG_0031.jpg
Attached picture IMG_0013.jpg
Posted By: Al_Alguire

Re: It fits...barely: back home and complete Dyno next ! - 01/12/19 03:09 AM

Just curious whos chassis dyno will you be using. Have a few friends up there
Posted By: CSK

Re: It fits...barely: back home and complete Dyno next ! - 01/12/19 03:23 AM

AWESOME !!!
Posted By: Edge

Re: It fits...barely: back home and complete Dyno next ! - 01/12/19 03:25 AM

going to Lethbridge LA Dyno Matt Blasco ( Dirty Drag Week Dart guy)
Posted By: racerhog

Re: It fits...barely: back home and complete Dyno next ! - 01/12/19 03:34 AM

That ride looks Sweeeet smile
Posted By: Dave Hall

Re: It fits...barely: back home and complete Dyno next ! - 01/12/19 10:07 AM

Originally Posted By racerhog
That ride looks Sweeeet smile


iagree Fantastic! Good luck and have fun!
Posted By: dvw

Re: It fits...barely: back home and complete Dyno next ! - 01/12/19 02:22 PM

I'd love to own it.
Doug
Posted By: bonefish

Re: It fits...barely - 01/12/19 04:56 PM

Originally Posted By Edge
Originally Posted By J_BODY
OCD guy wonders if you can get MSD decals for that ignition box so they're not upside down? laugh2

What a Beautiful build!!! can't believe this is into page 3 and I just noted it!



Yeah the points box upside down drives me a little crazy as well but I will have to learn to live with it
any decent sign shop could repro that sticker for ya.
Posted By: gsmopar

Re: It fits...barely - 01/12/19 05:04 PM

Awesome!
Posted By: 440GTX

Re: It fits...barely - 01/12/19 08:50 PM

Great looking car good luck
Posted By: 72Challenger

Re: It fits...barely - 01/23/19 10:34 AM

No video yet...curious how it went...
Hopefully great results!!
Posted By: LAD 524

Re: It fits...barely - 01/23/19 02:19 PM

Nasty...Nasty, NASTY !!
Posted By: racerx

Re: It fits...barely: car is complete and ready for dyno - 01/23/19 04:04 PM

coffee
Posted By: Dave Hall

Re: It fits...barely: car is complete and ready for dyno - 01/23/19 07:33 PM

bump
Posted By: hemi-itis

Re: It fits...barely: back home and complete Dyno next ! - 01/23/19 07:43 PM

Originally Posted By dvw
I'd love to own it.
Doug

DITTO!! I'm smellin 3's whistling
Posted By: Wax

Re: It fits...barely: back home and complete Dyno next ! - 02/02/19 05:38 AM

BUMP
Posted By: Edge

Re: It fits...barely: back home and complete Dyno next ! - 02/03/19 05:51 AM

Trip to chassis dyno has been delayed I had to send racepak back for firmware update as it would not read new sensors (EGT's). Waiting for box to come back and will reschedule hopefully before end of Feb. Going to watch a friends Bonneville car on the dyno next friday so will post a video of how that goes.
Posted By: WHITEDART

Re: It fits...barely: back home and complete Dyno next ! - 02/03/19 06:17 AM

Good luck hope everything goes well
Posted By: wesw

Re: It fits...barely: back home and complete Dyno next ! - 02/03/19 11:33 AM

Bad to the bone ride, I would be proud to own it. good luck on the dyno.
Posted By: Wax

Re: It fits...barely: back home and complete Dyno next ! - 03/02/19 09:03 PM

Have you had time to get to the dyno? We are all curious. Thanks
Posted By: Edge

Re: It fits...barely: back home and complete Dyno next ! - 03/03/19 10:23 PM

Still in the middle of a deep freeze up here ! -20 C is the high today ! Needs to get close to freezing to do the dyno session. Having been messing with the tune a little and have it starting and running better. Here is a link to a start and idle video
https://www.youtube.com/watch?v=QXDdvGJOtLY&feature=youtu.be
Posted By: Dave Hall

Re: It fits...barely: back home and complete Dyno next ! - 03/03/19 11:09 PM

Sounds great!
Posted By: Edge

Re: It fits...barely: back home and complete Dyno next ! - 03/04/19 01:43 AM

Thanks
Posted By: Wax

Re: It fits...barely: back home and complete Dyno next ! - 03/04/19 06:04 PM

Edge: Thanks for the video. Sounds awesome for sure. We are also in a deep freeze for being the first of March. Was -10F here in Wyoming this morning with a wind chill of -25F. TOO damn cold to give a darn about very much.

Keep us posted on the dyno numbers etc.

Very very nice car for sure. Thanks again.
Posted By: Al_Alguire

Re: It fits...barely: back home and complete Dyno next ! - 03/04/19 06:48 PM

Do you have anyone help you tune the car? I know of a pretty good tuner up in the frozen tundra..

Looks great I am sure you are itching to see what it will do
Posted By: Edge

Re: It fits...barely: back home and complete Dyno next ! - 03/06/19 01:54 AM

Yes, Matt Blasco is going to be tuning the car, he has the Dirty Twin Turbo Dart that has some done very well at Drag Week, he knows how to make some power and has some experience with BigStuff3. I am getting itchy to make some noise with this thing all it has been doing is burning a hole in my pocket for several years now.
Posted By: Al_Alguire

Re: It fits...barely: back home and complete Dyno next ! - 03/06/19 02:11 AM

Sounds like you have a good handle on the tune. Neil Richards(cream dream) was who I was referring to, but sounds like you have that handled for sure.
Posted By: Edge

Re: It fits...barely: back home and complete Dyno next ! - 03/06/19 02:22 AM

Thanks Al, this is all uncharted territory for me at this point.
Posted By: dthemi

Re: It fits...barely: back home and complete Dyno next ! - 03/09/19 06:02 PM

That is a beautiful piece of work.
Posted By: Edge

Re: It fits...barely: back home and complete Dyno next ! - 03/10/19 08:42 PM

Thanks DTHemi, I decided to redo the front spoiler so the body lines match better and will lower front spoiler another 1 1/2 inches just not happy with the current front spoiler. The racepak is back working fine it just needed a firmware update ( racepak even covered the return shipping and this V300 is likely 12 years old. Ready for the dyno as soon as the weather improves.
Posted By: Edge

Re: It fits...barely: back home and complete Dyno next ! - 03/23/19 08:15 PM

Just back from Lethbridge having Duster tuned on the dyno. Session went well and we wrapped up at midnight. No hp number between tire spin, short wide open hits in high gear and there is really no tipping into the throttle. Makes 32 psi at 7500 RPM not leaning on it. I have never seen anything quite so violent on the dyno. Car has a great stable tune on with a steady 3.9 AFR and around 1100 F egt across all cylinder. How do you not like efi.

Here is a link to some dyno pulls.

https://youtu.be/f2FFo8q7zLQ

One more step ! We will be participating in a track rental in June is the next step.

Attached picture IMG_0104.jpg
Posted By: Dave Hall

Re: It fits...barely: back home and complete Dyno next ! - 03/23/19 08:45 PM

Good GOD! I am going to have to fly up there in June! Fantastic build and glad you shared everything with us! up
Posted By: pittsburghracer

Re: It fits...barely: back home and complete Dyno next ! - 03/23/19 08:55 PM

Wholly crap!!!!!!!! That thing sounds WICKED. very nice.
Posted By: Edge

Re: It fits...barely: back home and complete Dyno next ! - 03/23/19 08:59 PM

My pleasure its quite a journey, the video really does not do justice to the pull. First stab on the throttle scared the heck out of me. Going to be interesting to hook this thing.
Posted By: pittsburghracer

Re: It fits...barely: back home and complete Dyno next ! - 03/23/19 09:07 PM

Originally Posted by Edge
My pleasure its quite a journey, the video really does not do justice to the pull. First stab on the throttle scared the heck out of me. Going to be interesting to hook this thing.




I know you said you hoped to run some Top Sportman races. I hope you have some locally as my Friends really got hit when IHRA discontinued all the classes and went ET only. Several of them already sold their cars to move into something slower and more repeatable for the big money bracket races.
Posted By: Edge

Re: It fits...barely: back home and complete Dyno next ! - 03/23/19 09:42 PM

Mostly NHRA around here as well as some 1/8 mile heads up so no shortage for now.
Posted By: Wax

Re: It fits...barely: back home and complete Dyno next ! - 11/08/20 02:55 AM

Take this to the top so we can ALL drool over this awesome build. Damn that car is sexy.

You should be extremely proud of it that’s for sure.
Posted By: Edge

Re: It fits...barely: back home and complete Dyno next ! - 11/08/20 04:38 PM

[u][/u]
thanks I appreciate it
Posted By: HardcoreB

Re: It fits...barely: back home and complete Dyno next ! - 11/09/20 01:30 PM

Badazz
© 2024 Moparts Forums