Hemi rocker arm shaft bolts?

Posted By: Troy

Hemi rocker arm shaft bolts? - 11/24/15 08:01 AM

Hi everybody. I know Hemi rocker are shaft bolts are 3/16NC but how long are they? Trying to put an order together for ARP and I don't know the length.

Thanks, Troy

Posted By: Teamx

Re: Hemi rocker arm shaft bolts? - 11/24/15 09:23 AM

Here you go!

Attached picture Picture 008.jpg

Posted By: rickseeman

Re: Hemi rocker arm shaft bolts? - 11/24/15 04:33 PM

I assume 3/16" is a typo

Posted By: Cab_Burge

Re: Hemi rocker arm shaft bolts? - 11/24/15 09:26 PM

Originally Posted By rickseeman

I assume 3/16" is a typo

3/8x16 is what I remember

Posted By: Troy

Re: Hemi rocker arm shaft bolts? - 11/25/15 03:13 AM

Oops, my bad. Yes, 3/8. Thanks everybody.

Posted By: 73DAD

Re: Hemi rocker arm shaft bolts? - 11/25/15 02:48 PM

Why ARP bolts for the rocker shaft to stand bolts? All they do is positively locate the shafts in the stands, keep them from sliding, and turning. The only time i think they would see an actual load is if a rocker seized and tried to twist the shaft. If I'm wrong, somebody set me straight on this.

Posted By: B G Racing

Re: Hemi rocker arm shaft bolts? - 11/25/15 04:11 PM

Originally Posted By 73DAD

Why ARP bolts for the rocker shaft to stand bolts? All they do is positively locate the shafts in the stands, keep them from sliding, and turning. The only time i think they would see an actual load is if a rocker seized and tried to twist the shaft. If I'm wrong, somebody set me straight on this.

Your correct,only need grade 5 or 8 bolts,the ARP stuff is for the the "wow".If the rocker seizes and wants to turn the shaft with 5 bolts holding it then there is a bigger problem.