I guess I'm going to wait and see if I have to have surgery and if I do as soon as I get over it I guess I will try to pull the motor back out. Can i just pull the intake off and the lifters and pull the cam out and get a new cam bearing put in with out tearing the motor back down? I'll have to find me a new shop that can maybe do it right so I don't have to worry about it any more. Thanks for the info.
You dont need to pull the engine.. just the radiator
and the front of the engine... I have cut the bearings
out without knocking them out... a hack saw blade and
no handle..just rapped tape around it..I broke about
1/2 the blade off and spit the bearing... see if you
can bend it and pull it out with pliers(needle nose)..
then(do this first thing... see if you can turn the
bearing sideways to get it through the top drain back hole..
if you can great.. if you cant you will need to knock out all
the front bearings and start stay way..... at worst you might
have to drop the pan.... if you get the bearing/s in and its
still wont spin with your fingers your gonna have yo size the
bearing with a old cam and slits