Moparts

The pinion angle thread: A helpful hint

Posted By: 64Post

The pinion angle thread: A helpful hint - 05/13/15 12:28 AM

Looking through the pinion angle thread gave me a headache, so I'd like to provide a helpful hint for most of you fine folks. If you hold down the alt/option key and hit the "0" key on your keyboard, you can use the degree character. (At least I can; if you can't then too bad)

See: 4º, there it is...

4º, there it is again... no magic involved.

One more time ...4º

So stop using * instead of º, you look like idiots. laugh2

You're Welcome! biggrin tonguue

Warning: Above post may contain good-natured ribbing, sarcasm and general smart-assery. Don't get your knickers in a knot. It's all in good fun.
Posted By: DusterDave

Re: The pinion angle thread: A helpful hint - 05/13/15 02:42 AM

Another way to get the degree symbol, is to hold down the ALT key, and type 167.

thumbs
Posted By: skicker

Re: The pinion angle thread: A helpful hint - 05/13/15 03:12 AM

Watch out Post...that's a rough crowd on that thread... whistling It's good no one knows where you really are... catfight rant argue
Posted By: crackedback

Re: The pinion angle thread: A helpful hint - 05/13/15 04:25 AM

F*********************** Y**************************

****************************************************

Posted By: Sport440

Re: The pinion angle thread: A helpful hint - 05/13/15 04:27 AM

Originally Posted By 64Post
Looking through the pinion angle thread gave me a headache, so I'd like to provide a helpful hint for most of you fine folks. If you hold down the alt/option key and hit the "0" key on your keyboard, you can use the degree character. (At least I can; if you can't then too bad)

See: 4º, there it is...

4º, there it is again... no magic involved.

One more time ...4º

So stop using * instead of º, you look like idiots. laugh2

You're Welcome! biggrin tonguue

Warning: Above post may contain good-natured ribbing, sarcasm and general smart-assery. Don't get your knickers in a knot. It's all in good fun.



4, Not here brother! Here Alt/option and 0 key = 4, as just shown.

For me, its 4 + alt 0176 on the right hand numbers pad. 4°

To much Extra work for me, when I can just do, 4*

And , most will/should understand that.



For me 1 Extra poke, VS 5 Extra pokes on the key board.

Not a idiot here, just lazy.


Appreciate your concern and Humor. But, Your Pinion angle ** help stuff isn't helping me. °°°° LOL

But. I will review the other ways that people have been successful at. * vs °

Posted By: MR_P_BODY

Re: The pinion angle thread: A helpful hint - 05/13/15 04:39 AM

Originally Posted By Sport440
Originally Posted By 64Post
Looking through the pinion angle thread gave me a headache, so I'd like to provide a helpful hint for most of you fine folks. If you hold down the alt/option key and hit the "0" key on your keyboard, you can use the degree character. (At least I can; if you can't then too bad)

See: 4º, there it is...

4º, there it is again... no magic involved.

One more time ...4º

So stop using * instead of º, you look like idiots. laugh2

You're Welcome! biggrin tonguue

Warning: Above post may contain good-natured ribbing, sarcasm and general smart-assery. Don't get your knickers in a knot. It's all in good fun.



4, Not here brother! Here Alt/option and 0 key = 4, as just shown.

For me, its 4 + alt 0176 on the right hand numbers pad. 4°

To much Extra work for me, when I can just do, 4*

And , the Elite should understand that.



For me 1 Extra poke, VS 5 Extra pokes on the key board.

Not a idiot here, just lazy.


Appreciate your concern and Humor. But, Your Pinion angle ** help stuff isn't helping me. °°°° LOL

But. I will review the other ways that people have been successful at. * vs °



Same here... its not worth my time.. everyone seems to know
what this means *... so I'll continue to use it
wave
Posted By: 64Post

Re: The pinion angle thread: A helpful hint - 05/13/15 04:50 AM

Originally Posted By Sport440
Originally Posted By 64Post
Looking through the pinion angle thread gave me a headache, so I'd like to provide a helpful hint for most of you fine folks. If you hold down the alt/option key and hit the "0" key on your keyboard, you can use the degree character. (At least I can; if you can't then too bad)

See: 4º, there it is...

4º, there it is again... no magic involved.

One more time ...4º

So stop using * instead of º, you look like idiots. laugh2

You're Welcome! biggrin tonguue

Warning: Above post may contain good-natured ribbing, sarcasm and general smart-assery. Don't get your knickers in a knot. It's all in good fun.



5, Not here brother! Here Alt/option and 0 key = 5, as just shown.

For me, its 5 + alt 0176 on the right hand numbers pad. 5°

To much Extra work for me, when I can just do, 5*

And , the Elite should understand that.



For me 1 Extra poke, VS 5 Extra pokes on the key board.

Not a idiot here, just lazy.



Perhaps a keyboard shortcut is in order. wave

P.S. My apologies for inadvertently referring to you as an idiot. I'll add you to the lazy column instead. laugh2
Posted By: 64Post

Re: The pinion angle thread: A helpful hint - 05/13/15 04:52 AM

Originally Posted By crackedback
F*********************** Y**************************

****************************************************



Your º of humor is appreciated. haha
Posted By: 64Post

Re: The pinion angle thread: A helpful hint - 05/13/15 04:54 AM

Originally Posted By skicker
Watch out Post...that's a rough crowd on that thread... whistling It's good no one knows where you really are... catfight rant argue


I rolled past your place (generally) Sunday morning on the way out of town. My work is done until the next riot.
Posted By: skicker

Re: The pinion angle thread: A helpful hint - 05/13/15 02:01 PM

laugh2
Posted By: racerhog

Re: The pinion angle thread: A helpful hint - 05/13/15 04:42 PM

You get what you get... -4* + You Deflection... smile
Posted By: CMcAllister

Re: The pinion angle thread: A helpful hint - 05/13/15 08:24 PM

Doesn't work for me. Someone else told me the "degree" key was beside the "any" key but I haven't been able to find it.
Posted By: Sport440

Re: The pinion angle thread: A helpful hint - 05/14/15 12:32 AM

Originally Posted By CMcAllister
Doesn't work for me. Someone else told me the "degree" key was beside the "any" key but I haven't been able to find it.




Try This; Push/hold the Alt key, then type 0176 on the Far right numeral pad, then release. And Wallya °

° :-}
Posted By: GY3

Re: The pinion angle thread: A helpful hint - 05/14/15 04:20 AM

Originally Posted By 64Post
Originally Posted By Sport440
Originally Posted By 64Post
Looking through the pinion angle thread gave me a headache, so I'd like to provide a helpful hint for most of you fine folks. If you hold down the alt/option key and hit the "0" key on your keyboard, you can use the degree character. (At least I can; if you can't then too bad)

See: 4º, there it is...

4º, there it is again... no magic involved.

One more time ...4º

So stop using * instead of º, you look like idiots. laugh2

You're Welcome! biggrin tonguue

Warning: Above post may contain good-natured ribbing, sarcasm and general smart-assery. Don't get your knickers in a knot. It's all in good fun.



5, Not here brother! Here Alt/option and 0 key = 5, as just shown.

For me, its 5 + alt 0176 on the right hand numbers pad. 5°

To much Extra work for me, when I can just do, 5*

And , the Elite should understand that.



For me 1 Extra poke, VS 5 Extra pokes on the key board.

Not a idiot here, just lazy.



Perhaps a keyboard shortcut is in order. wave

P.S. My apologies for inadvertently referring to you as an idiot. I'll add you to the lazy column instead. laugh2




Settle down, "Richard"! laugh2
Posted By: Pacnorthcuda

Re: The pinion angle thread: A helpful hint - 05/14/15 04:28 AM

I am 2* from Kevin Bacon (my wife is 1).
Posted By: DusterDave

Re: The pinion angle thread: A helpful hint - 05/14/15 04:48 AM

Originally Posted By Sport440
Originally Posted By CMcAllister
Doesn't work for me. Someone else told me the "degree" key was beside the "any" key but I haven't been able to find it.




Try This; Push/hold the Alt key, then type 0176 on the Far right numeral pad, then release. And Wallya °

° :-}

Adding the 0 to the 176 gives me a funky symbol. ALT and 167 on the keypad works for me.
© 2024 Moparts Forums