Posted By: PETE@BESTMACHINE
Dyno Testing Discount For Moparts Members - 03/25/15 04:12 PM
Any members that would like to run there engines after the winter freshen up or test some different stuff give us a call. We are a dealer for VP race fuel. The cost would be 500.00 for the day.
Posted By: CTD5.9
Re: Dyno Testing Discount For Moparts Members - 03/25/15 04:44 PM
I can't drive across the continent and into a different country to dyno my engine. But I have to say your facebook posts are awesome thanks for sharing the engines you are building with us!
Posted By: Chuck@Best_Machine
Re: Dyno Testing Discount For Moparts Members - 03/25/15 07:49 PM
Here is a link to some dyno pictures
https://www.facebook.com/media/set/?set=a.614626825259671.1073741837.135175363204822&type=3There are 1000`s of engine build pictures on Facebook as well as videos
Thanks for the support
Posted By: OUTLAWD
Re: Dyno Testing Discount For Moparts Members - 03/25/15 08:57 PM
This is almost enough of a reason to build a motor
Posted By: HardcoreB
Re: Dyno Testing Discount For Moparts Members - 03/27/15 04:03 AM
For the benefit of anybody interested including me, I have some questions. Specifically what do you get for $500.
1)Are oil psi and temp, coolant temp, 8 egt's, vacuum and A/F ratio all included?
2)I have 2 4150's on a tunnel-ram, does that change the cost?
3)Can I use my ignition box, coil and fuel press regulator?
4)Do I get to use the dyno for 1 day for misc parts testing? e.g-carbs, headers, intakes?
5)I am using pump gas (93). Do you run out of a barrel or do I bring my own?
Posted By: Chuck@Best_Machine
Re: Dyno Testing Discount For Moparts Members - 03/27/15 03:07 PM
Hi Sean, Here is what’s included.
You have the Dyno for the day 8:30 to 5:00 which includes hooking it up and taking it off. You could use our headers or yours. We don't have any Hemi or Sm Block Headers so you would have to bring your own for those.
We have :
L/R O2s
8 EGTs
Oil Press
Oil Temp
Coolant Temp
Vacuum
Fuel Press
BSFC
Full Weather Station
No extra charge for Tunnel Ram
Bring your own Fuel and we will weight it for SG
We are a VP Dealer if you need fuel
You can test parts and make as many pulls as you would like.
You will be doing the tuning and any parts swapping, we will be more than happy to offer any advice on tuning
As far as using your Ignition Box and Fuel Regulator we would prefer not to but that could be discussed. Our dyno is set up for Mopar and does not require a flywheel either.
Posted By: Anonymous
Re: Dyno Testing Discount For Moparts Members - 03/27/15 06:55 PM
Very cool Chuck.
Posted By: bigtimeauto
Re: Dyno Testing Discount For Moparts Members - 03/28/15 04:38 AM
That's a great deal from a very smart shop. Wish I was closer I would be on that!
Posted By: mopar dave
Re: Dyno Testing Discount For Moparts Members - 03/28/15 05:10 AM
ok, so if your done in 4 hours would it be $250?
Posted By: mopar dave
Re: Dyno Testing Discount For Moparts Members - 03/28/15 04:16 PM
I was just curious if it only takes me half a day to finish if I would have to pay for the whole day. I have a shop near me that does it that way. $500 for the day, but only change for what you use. didn't mean to offend anyone.
Posted By: AndyF
Re: Dyno Testing Discount For Moparts Members - 03/28/15 04:51 PM
Looks like a nice setup Pete. I'll haul my dyno mule over some day for a spin.
Posted By: mopar dave
Re: Dyno Testing Discount For Moparts Members - 03/29/15 09:04 PM
I agree, but that's not the dyno i'm goin to. I have a shop 15 min. away with an engine dyno as well as a chassis dyno. i'v given up on getting the pump gas 408 into the 9's in a 3300# full interior car. my new program is in the works with reworked heads by Dwayne Welder to start and a full rebuild of the 408 to a 410 13.5-14:1 comp. and a regrind by bullet of the cam again. the best the 408 did was
10.35@130 in a street trim that could be driven most anywhere. just gonna put it in the 9's and sell the car. cant afford this hobby any longer.
Posted By: mopar dave
Re: Dyno Testing Discount For Moparts Members - 03/30/15 04:12 PM
you have to drop off ahead of time.
Posted By: mopar dave
Re: Dyno Testing Discount For Moparts Members - 03/30/15 04:15 PM
my goal is to get it in the 9's n/a. then it gets a street bb or I sell it for a b body car with a bb. getting tired of wrenching on it more than I drive it.
Posted By: B1Johnny
Re: Dyno Testing Discount For Moparts Members - 03/31/15 03:14 AM
500 to dyno a motor is an awesome deal,i spent 800 plus fuel.it was worth every penny we found out what the motor wanted.spending a day at Best with tuning help for 500 is a deal.after reading some of these posts about money ,that's why we cant get blocks and heads most Mopar guys not all are cheap.
Posted By: dartdragracer
Re: Dyno Testing Discount For Moparts Members - 04/02/15 11:28 AM
Chuck,
Brian V. here.
If I can get this deal for $500 Vs. $850, I will go ahead with ordering the Logo Valve covers and cover the cost difference.
Great looking Pieces and good way to advertise.
The attached picture is from Best Machine Facebook Page.
I'll give you a call.
Thanks,
Brian V.
Posted By: dartdragracer
Re: Dyno Testing Discount For Moparts Members - 04/03/15 01:35 AM
Perfect, You guys are top notch.
looking foward to getting it on the dyno.