Posted By: fattire
Carb adaptor thickness ? - 03/11/15 11:59 PM
What the thinnest adaptor you would use or does it matter hood clearance is an issue? Going to a Dom from a Demon.
Carb adaptor thickness ?
Posted By: markz528
Re: Carb adaptor thickness ? - 03/12/15 12:25 AM
2 inch. The thin ones are useless.
Posted By: 383man
Re: Carb adaptor thickness ? - 03/12/15 02:55 AM
I use a 1" as its all I can fit under my hood. But I dont use it for performance as I use a phenolic spacer to help fight eng heat in the carb and its a big help. Since mine is a street car I really need it. Ron
Posted By: fattire
Re: Carb adaptor thickness ? - 03/12/15 03:02 AM
Yes not using the spacer for any performance gains just want to be able to get the gains from the Dom.
Posted By: AndyF
Re: Carb adaptor thickness ? - 03/12/15 03:16 AM
What engine combo? If it is a big block you can buy a Mopar M1 4500 intake fairly cheap and they work great.
Posted By: Thumperdart
Re: Carb adaptor thickness ? - 03/12/15 05:21 AM
Quote:I think the shorter one is an issue myself and run the 2 in. plus a half in. 4 hole wooden spacer to help with heat and make it taller to lengthen the runners and improve the signal.
Yes not using the spacer for any performance gains just want to be able to get the gains from the Dom.
Posted By: fattire
Re: Carb adaptor thickness ? - 03/12/15 02:11 PM
That's the info I needed Thumper thanks, I'm running a Victor now Andy and like it probably not a lot of difference between them.
Posted By: an8sec70cuda
Re: Carb adaptor thickness ? - 03/12/15 03:02 PM
Quote:
2 inch. The thin ones are useless.
