pix of a bodys with tunnel rams

Post up your pix. I'm putting a indy tunnel ram on my low deck in a 68 valiant. Trying to get an idea of how much hood scoop I'll need. Thanks

Here's a sheet metal one

My scoop is 5". I have about 1 1/2" of clearance. MAX. Wish I had more.

Here's a profile of the 71 with a 499 low deck with Indy tunnel ram

Hope this will help.

All I got

OhioJoe, what track do you run at? Nice car.


73DartSport owns my old car, it had a 451 low deck with an M1 TR and two 750 Quickfuel carbs. I loved this setup at the track but it was real thirsty on the street, went through alot of fuel. The scoop was either 7" or 9" tall, can't remember but it's one of the smaller aero scoops.

Scoop...

i was hoping to get away with a cowl. looking like i might have to rethink how much i need to see to the right. guess i need to try and get the right lane.lol

Here's a pic from Norwalk. We live close to Tri-State, Kil-Kare and Edgewater.

Cool photo.


I never had any problems seeing around my scoop. If it was any bigger it would get annoying. You can also just run an aluminum hilborn scoop sticking through the hood like OhioGTX does, I think they look awesome, and some guys run custom clear lexan scoops.

I ran a low deck motor and I ran the M1 because it was the shortest tunnel ram.

Maybe I can lower the motor down in the engine compartment

i have a 67 valaint in the works. where can i check out some pictures of your 68 ?

This is an RB... I am afraid this intake was never made for a B. Never know, you could be running stage VI heads...

EFI throttle bodies are shorter than carbs.

Fits under 3" six pack scoop.

-Michael