Aluminum timing cover BB

Posted By: Cuda367

Aluminum timing cover BB - 01/17/15 01:42 PM

Looking for one because of roller cam button. Who makes them?

Posted By: TooMany62s

Re: Aluminum timing cover BB - 01/17/15 02:26 PM

Here ya go:

http://www.manciniracing.com/mabbialtico.html

I'm using one of these with a hydraulic roller and cam button. No problems. A little expensive but worth it in my opinion.

Posted By: Anonymous

Re: Aluminum timing cover BB - 01/17/15 04:26 PM

I got mine from Nick at Compuflow.

Posted By: MRMOPAR622

Re: Aluminum timing cover BB - 01/17/15 05:14 PM

I had and liked the Indy ones on my Mopar engines.

Posted By: 440Jim

Re: Aluminum timing cover BB - 01/17/15 05:17 PM

Quote:

Here ya go:

http://www.manciniracing.com/mabbialtico.html

I'm using one of these with a hydraulic roller and cam button. No problems. A little expensive but worth it in my opinion.

Mancini also carries the Indy plain cast aluminum timing cover for $125
http://www.manciniracing.com/inbhecaaltic.html

Posted By: pattyboy 572

Re: Aluminum timing cover BB - 01/17/15 06:31 PM

used this one ok no problems 3 years works with cam button to.. http://store.440source.com/Fabricated-Aluminum-Timing-Cover/productinfo/200-1089/

Posted By: AndyF

Re: Aluminum timing cover BB - 01/17/15 09:51 PM

The Mancini webpage info needs to be updated. Best place for info is my website. I also have two piece covers for the SB guys.

http://arengineering.com/home-page/engine-parts/

Posted By: Stanton

Re: Aluminum timing cover BB - 01/17/15 11:49 PM

Indy covers don't fit under stock style water pumps. Muscle Motors used to sell a really nice cast cover for about $100. that fits great.

Posted By: AndyF

Re: Aluminum timing cover BB - 01/18/15 01:14 AM

Right, that was one reason why I started to make my own. I designed my billet cover to be low enough to fit under a MP aluminum water pump housing. I also added the adjustable TDC pointer which the Indy cover doesn't have and I used the more modern front loaded seal design. I also include a setup plate so a guy can check the end play on the camshaft.

Posted By: ccdave

Re: Aluminum timing cover BB - 01/18/15 01:57 AM

I have built several BB roller engines with the stock timing cover. I fit a washer on the back of the water pump so the timing cover rests onto the washer if the cam walks forward.

Never had a problem

Posted By: 440Jim

Re: Aluminum timing cover BB - 01/18/15 02:54 AM

Quote:

Indy covers don't fit under stock style water pumps.

Since I have a front engine plate (1-piece elephant ears type), the Indy cover clears the MP aluminum water pump housing on my race car.

Posted By: 68roadrunner

Re: Aluminum timing cover BB - 01/18/15 04:09 PM

Quote:

Quote:

Indy covers don't fit under stock style water pumps.

Since I have a front engine plate (1-piece elephant ears type), the Indy cover clears the MP aluminum water pump housing on my race car.

you had to have the right balancer to fit that cover didnt you? with a longer snout

Posted By: MartyQ

Re: Aluminum timing cover BB - 01/18/15 08:10 PM

http://www.compu-flow.com/

Posted By: MartyQ

Re: Aluminum timing cover BB - 01/18/15 08:11 PM

http://www.compu-flow.com/New%20Products.html

Posted By: racerx

Re: Aluminum timing cover BB - 01/19/15 01:30 AM

Comp-flow's engine plates look's nice also

Posted By: pittsburghracer

Re: Aluminum timing cover BB - 01/19/15 01:51 AM

Quote:

Quote:

Quote:

Indy covers don't fit under stock style water pumps.

Since I have a front engine plate (1-piece elephant ears type), the Indy cover clears the MP aluminum water pump housing on my race car.

you had to have the right balancer to fit that cover didnt you? with a longer snout

They make a spacer you can install behind your balancer.

Posted By: 440Jim

Re: Aluminum timing cover BB - 01/19/15 06:41 PM

Quote:

Quote:

Quote:

Indy covers don't fit under stock style water pumps.

Since I have a front engine plate (1-piece elephant ears type), the Indy cover clears the MP aluminum water pump housing on my race car.

you had to have the right balancer to fit that cover didnt you? with a longer snout

I am using the same old Fluidamper I have used on all my builds.

Aluminum timing cover BB