Posted By: CALSDART
DISTRIBUTOR CAP-CLAMP ON-PUSH ON - 01/03/15 12:29 PM
Looking for a clamp on distributor cap for big & small block that the wires are pushed onto the stud terminals rather than pushed into the cap.
DISTRIBUTOR CAP-CLAMP ON-PUSH ON
Posted By: B G Racing
Re: DISTRIBUTOR CAP-CLAMP ON-PUSH ON - 01/03/15 03:15 PM
Echlin,Mopar performance and others have it.Mopar P/N P4529791(tan replacement)original color.Early black were Echlin and Prestolite and others. 
Posted By: jlatessa
Re: DISTRIBUTOR CAP-CLAMP ON-PUSH ON - 01/03/15 04:49 PM
I think he means the clamp? that goes over the terminals for security.
Joe
Joe
Posted By: hemi-itis
Re: DISTRIBUTOR CAP-CLAMP ON-PUSH ON - 01/03/15 07:20 PM
Like the old Mallory??
Posted By: Cab_Burge
Re: DISTRIBUTOR CAP-CLAMP ON-PUSH ON - 01/03/15 07:26 PM
Quote:Probally like MSD HEI caps
Like the old Mallory??
Posted By: CALSDART
Re: DISTRIBUTOR CAP-CLAMP ON-PUSH ON - 01/03/15 11:47 PM
Thanks for the info. The Jegs caps is the one.
Posted By: B G Racing
Re: DISTRIBUTOR CAP-CLAMP ON-PUSH ON - 01/04/15 01:58 PM
That Jegs cap is for HEI boots,thought you were looking for Mopar female style cap. 
Posted By: CALSDART
Re: DISTRIBUTOR CAP-CLAMP ON-PUSH ON - 01/04/15 04:16 PM
The HEI is the cap I was looking for. Thanks for the reply
Posted By: B G Racing
Re: DISTRIBUTOR CAP-CLAMP ON-PUSH ON - 01/04/15 04:54 PM
If you have trouble locating one check with Rick at Firecore.Firecore uses mopar style caps. 
Posted By: fourgearsavoy
Re: DISTRIBUTOR CAP-CLAMP ON-PUSH ON - 01/04/15 05:18 PM
You should just get a cap and rotor from Firecore50 (sunroofgtx) 
Gus
Gus
Posted By: sunroofgtx
Re: DISTRIBUTOR CAP-CLAMP ON-PUSH ON - 01/09/15 05:19 AM
Thanks, guys. The Jegs unit is ours. Thank you. Mancini or Bob George can get you one. Happy New Year.
Posted By: CALSDART
Re: DISTRIBUTOR CAP-CLAMP ON-PUSH ON - 01/09/15 02:57 PM
Thanks. The Jegs Unit works perfect. Thanks for all of the feedback. HAPPY NEW YEAR MOPAR FAMILY