ss type seat brackets

Posted By: blue_stocker

ss type seat brackets - 12/19/14 07:47 AM

A couple of years ago ??? somebody was making aluminum seat brackets for A-100 type race seats or seats that could be used for race seats. Anybody recall who was making them? Thanks...

Posted By: cudadoug

Re: ss type seat brackets - 12/19/14 09:47 AM

Curley's Race Cars I believe...somewhere in Nor Cal. Sac area maybe??

How are things in Dunnigan?? We HAVE to get together one of these days!

Posted By: blue_stocker

Re: ss type seat brackets - 12/19/14 10:04 AM

I wouldn't know Doug, don't live there, up the road a bit farther in Dunsmuir. Haha..getting the Whale ready to sell in the spring as a street cruiser, handler and canyon carver, should be a fun car for somebody...ELSE! I'm planning one last hurrah, a wagon so I can tote my drums around for gigging...'65 Belvedere wagon. Hmm, sounds like fun, what cha think?

I found a post from 2012 StrokerAspen aka: Kenny Joss... thanks for jogging my memory Doug...I needed it!

Posted By: GY3

Re: ss type seat brackets - 12/19/14 01:08 PM

ssandafx.com

Posted By: Quickrunner

Re: ss type seat brackets - 12/19/14 03:11 PM

Gary Ball, he made repo a100 seats and sold the aluminum mounts. Lot of the max wedge guys and nostalga ss guys run his stuff

Posted By: cudaboy

Re: ss type seat brackets - 12/19/14 08:42 PM

Quote:

I found a post from 2012 StrokerAspen aka: Kenny Joss... thanks for jogging my memory Doug...I needed it!

I don't think Kenny is making them anymore. Curley was making them about the same time also. i think I got one of Kenny's last sets.

Dennis

Posted By: moparbrown14

Re: ss type seat brackets - 12/19/14 10:08 PM

Got a set wanoting to sell call me 765 3969130

Posted By: Triggerfish

Re: ss type seat brackets - 12/20/14 12:13 AM

Greg Fernald at www.ssandafx.com

Posted By: fishy340

Re: ss type seat brackets - 12/20/14 01:00 AM

I have 2 sets and I'll let em go much much cheaper then the website sells em for...pm me if interested

Posted By: StrokerAspen

Re: ss type seat brackets - 12/20/14 01:33 AM

This is true, I have not made them for quite a while, I do have some left over stuff I can look through. Woody has spoken for my last set I know is complete. If there is still some big interest in them I will look into having them made again. Why I stopped, the last run I did, the waterjet cutter was slightly off, which didn't show up in overall dimensions of the finished part, but I held close tolerances for the gussets, and it was a huge head ache. I will look into running them again, and laser cut them again, and get them bent with a well set press brake.

-Kenny