Posted By: 451Mopar
Hughes 50% off CNC Head Porting - 11/27/14 09:59 AM
Hughes Engines has 50% off CNC Head porting.
Decided to order up another set of the Max Wedge Victor heads (CNC ported.) See if the new castings are better than the old ones?
Posted By: 64Post
Re: Hughes 50% off CNC Head Porting - 11/27/14 07:01 PM
Do you get any flow numbers with them, Jim?
Posted By: 451Mopar
Re: Hughes 50% off CNC Head Porting - 11/27/14 11:04 PM
It's on their web site:
http://www.hughesengines.com/TechArticles/1headflowchartscomparisons.php#4658S3380cfm @ 0.600"
397cfm @ 0.700"
406cfm @ 0.800"
My current cam is only 0.714" lift.
Posted By: Bishop
Re: Hughes 50% off CNC Head Porting - 11/28/14 03:57 PM
I wished they did Indy 440-1 looks like there going to MCH
Posted By: 451Mopar
Re: CNC Max Wedge Victors from Hughes. - 01/11/15 10:23 AM
Been awhile due to the Flu, but I was checking out the new victor heads.
First thing I noticed is the casting looks way better than my old victors, I don't see pock marks in the casting like the older castings I have. I also notices the castings look a but different with extra material on top of the intake ports that is machined flat. I will have to get some side by side photos for comparison.