Posted By: buck440
Stage6 heads? - 11/06/14 04:50 AM
Hi guys. can anyone tell me if I can use a tunnel ram with stage 6 heads?
Stage6 heads?
Posted By: Viper469
Re: Stage6 heads? - 11/06/14 05:22 AM
yep. 
Posted By: J_BODY
Re: Stage6 heads? - 11/06/14 05:38 AM
Low deck = RB manifold
Posted By: Wicked49670dart
Re: Stage6 heads? - 11/06/14 06:32 AM
Quote:
yep.
Nice car! Would you mind sharing your engine specs? My 496 with Stage VI has gone 9.76@135! Thanks Matt
Posted By: Joes66dart
Re: Stage6 heads? - 11/06/14 06:45 AM
Stage 6 heads on low deck with tunnel ram
Posted By: Wicked49670dart
Re: Stage6 heads? - 11/06/14 04:40 PM
Quote:
Stage 6 heads on low deck with tunnel ram
Very nice! What does this combo run?
Posted By: Joes66dart
Re: Stage6 heads? - 11/06/14 04:54 PM
It should run mid 9's when we get it all sorted out. It's a 470 low deck in a 66 dart chassis car. Weighs 3100 with driver
Posted By: Mr.Yuck
Re: Stage6 heads? - 11/06/14 05:14 PM
Quote:
yep.
how do you see the "tree" with all of that?
Posted By: JohnRR
Re: Stage6 heads? - 11/06/14 05:38 PM
Quote:
Hi guys. can anyone tell me if I can use a tunnel ram with stage 6 heads?
If you put them on an RB block you will need spacers to run an RB manifold. Mopar made/makes a specific 4bbl intake to use on an RB block without spacers , I do not know if they make a tunnel ram version .
Posted By: dogdays
Re: Stage6 heads? - 11/06/14 06:08 PM
To complicate the issue, didn't MP have some Stage VI heads in later years that didn't need the spacers? I seem to remember that.
R.
R.
Posted By: JohnRR
Re: Stage6 heads? - 11/07/14 01:30 AM
Quote:
To complicate the issue, didn't MP have some Stage VI heads in later years that didn't need the spacers? I seem to remember that.
R.
Yes they did but they were not stage 6's, just the same basic casting ... well they were sort of the same as they didn't fit on the block without some rework too ... they were a replacement type head with stock port location and a 1/2"ish passage for exh crossover.
Posted By: 6bblFLASH
Re: Stage6 heads? - 11/07/14 01:57 AM
Quote:Quote:
To complicate the issue, didn't MP have some Stage VI heads in later years that didn't need the spacers? I seem to remember that.
R.
Yes they did but they were stage 6's ... well they were sort of as they didn't fit on the block without some rework too ... they were a replacement type head with stock port location and a 1/2"ish passage for exh crossover.
All true,heres a pair on my 440
.jpg "8323594-stage6mockup(800x600).jpg")
Posted By: Bill MeLater
Re: Stage6 heads? - 11/07/14 02:13 AM
And that manifold is?
Posted By: 6bblFLASH
Re: Stage6 heads? - 11/07/14 03:14 AM
DLI modified Offenhauser for a blower
.jpg "8323732-Newmotor(800x600).jpg")
Posted By: hemi-itis
Re: Stage6 heads? - 11/07/14 05:18 AM
Needed spacer/adapter to use a 440 BDS intake on Chapman heads. 
Posted By: buck440
Re: Stage6 heads? - 11/08/14 02:32 AM
Thanks guys mine are on my 440. they have spacers. The reason I ask is my team g manifold will not bolt up center bolt holes are off?
Posted By: BloFish
Re: Stage6 heads? - 11/08/14 03:04 PM
I would like to try a tunnel ram set up on my 500ci/575 hp crate engine. Just need to start looking for parts.
Posted By: JohnRR
Re: Stage6 heads? - 11/08/14 05:08 PM
Quote:
Thanks guys mine are on my 440. they have spacers. The reason I ask is my team g manifold will not bolt up center bolt holes are off?
In which direction ?? Is just the manifold off or are the spacers also off ?
Posted By: buck440
Re: Stage6 heads? - 11/10/14 05:09 AM
Just the manifold. all but the center 4 bolts line up.